Je viens de redémarrer la machine, déjà GRUB fonctionnel c'est déjà un soulagement.
Ensuite, à présent le disque /dev/sdc est bien reconnu et plus d'erreurs remontés....je ne comprends pas trop là le pourquoi
Code : Tout sélectionner
cat /proc/mdstat
Personalities : [raid1] [linear] [multipath] [raid0] [raid6] [raid5] [raid4] [raid10]
md0 : active raid1 sdc1[1]
248640 blocks super 1.2 [2/1] [_U]
md1 : active raid1 sdc5[2]
976379712 blocks super 1.2 [2/1] [_U]
Code : Tout sélectionner
blkid
/dev/sda1: UUID="HzABOp-flSV-VOv2-srUP-Se6S-ORH7-a2CAdk" TYPE="LVM2_member" PARTUUID="88d5b421-01"
/dev/sdb1: UUID="9ff36b7e-0140-2f40-ff95-c22e29c06d0c" UUID_SUB="c87d8a38-75b8-8fba-54be-b74860412da8" LABEL="matrix:0" TYPE="linux_raid_member" PARTUUID="000c3447-01"
/dev/sdb5: UUID="da0001eb-7144-c010-08b0-918a31d63cea" UUID_SUB="3dabb169-8eca-7481-9897-8f4e3888b862" LABEL="matrix:1" TYPE="linux_raid_member" PARTUUID="000c3447-05"
/dev/sdc1: UUID="9ff36b7e-0140-2f40-ff95-c22e29c06d0c" UUID_SUB="4f48d804-f127-1cfa-27ae-942c852c632a" LABEL="matrix:0" TYPE="linux_raid_member" PARTUUID="0002704b-01"
/dev/sdc5: UUID="da0001eb-7144-c010-08b0-918a31d63cea" UUID_SUB="7a7dc06f-1394-17f1-3bc1-8123a9611d3a" LABEL="matrix:1" TYPE="linux_raid_member" PARTUUID="0002704b-05"
/dev/md1: UUID="wULXny-v9Dl-GFlF-OPRp-Gl3k-SA9a-2BVPLL" TYPE="LVM2_member"
/dev/md0: UUID="ae665ec8-e25d-4ae0-8ce1-57d1069bcede" BLOCK_SIZE="1024" TYPE="ext3"
/dev/mapper/lvmgrp-lvmgrp_root: UUID="c1921e2f-75fd-4131-a9b3-533da082121d" BLOCK_SIZE="4096" TYPE="ext4"
/dev/mapper/lvmgrp-lvmgrp_home: UUID="037c0d4d-74de-486d-b416-42bd56b86c7f" BLOCK_SIZE="4096" TYPE="ext4"
/dev/mapper/lvmgrp-lvmgrp_swap: UUID="fdbd8abc-e179-41ef-aee1-ddc31fc1ac48" TYPE="swap"
/dev/mapper/lvmgrp-lvmgrp_var: UUID="2b073fba-dc91-4508-9dbe-975ad2ff6535" BLOCK_SIZE="4096" TYPE="ext4"
/dev/sdd1: UUID="YY2RIK-W4LX-lSaR-t05O-eX1n-IZLs-0S2AWf" TYPE="LVM2_member" PARTUUID="7bca6561-01"
/dev/mapper/vgddext-lvddext: UUID="73387a57-b8a7-4d9f-873b-f94895a27514" BLOCK_SIZE="4096" TYPE="ext4"
lshw -C disk
Code : Tout sélectionner
*-disk:0
description: ATA Disk
produit: ST1000DM003-1CH1
identifiant matériel: 0
information bus: scsi@1:0.0.0
nom logique: /dev/sdb
version: CC56
numéro de série: Z1D51QJ8
taille: 931GiB (1TB)
fonctionnalités: partitioned partitioned:dos
configuration: ansiversion=5 logicalsectorsize=512 sectorsize=4096 signature=000c3447
*-disk:1
description: ATA Disk
produit: ST1000DM003-1CH1
identifiant matériel: 1
information bus: scsi@3:0.0.0
nom logique: /dev/sdc
version: CC47
numéro de série: Z1D7K8Y4
taille: 931GiB (1TB)
fonctionnalités: partitioned partitioned:dos
configuration: ansiversion=5 logicalsectorsize=512 sectorsize=4096 signature=0002704b
Code : Tout sélectionner
smartctl -a /dev/sdc
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.0-11-amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.14 (AF)
Device Model: ST1000DM003-1CH162
Serial Number: Z1D7K8Y4
LU WWN Device Id: 5 000c50 0652def0a
Firmware Version: CC47
User Capacity: 1 000 204 886 016 bytes [1,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sun Jan 23 21:04:14 2022 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 584) seconds.
Offline data collection
capabilities: (0x73) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 106) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x3085) SCT Status supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 113 099 006 Pre-fail Always - 56384680
3 Spin_Up_Time 0x0003 098 097 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 512
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 089 060 030 Pre-fail Always - 5138109335
9 Power_On_Hours 0x0032 031 031 000 Old_age Always - 60970
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 513
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 0 0
189 High_Fly_Writes 0x003a 072 072 000 Old_age Always - 28
190 Airflow_Temperature_Cel 0x0022 063 051 045 Old_age Always - 37 (Min/Max 30/38)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 400
193 Load_Cycle_Count 0x0032 001 001 000 Old_age Always - 382185
194 Temperature_Celsius 0x0022 037 049 000 Old_age Always - 37 (0 15 0 0 0)
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 55454h+57m+36.688s
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 227983715320
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 308809721423
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 60873 -
# 2 Short offline Interrupted (host reset) 10% 60739 -
# 3 Short offline Interrupted (host reset) 10% 60724 -
# 4 Short offline Completed without error 00% 4030 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Code : Tout sélectionner
cat /var/log/kern.log | grep ata
Jan 23 20:55:55 matrix kernel: [ 0.000000] BIOS-e820: [mem 0x0000000095b32000-0x0000000095b3cfff] ACPI data
Jan 23 20:55:55 matrix kernel: [ 0.161528] Memory: 2570344K/3746632K available (12295K kernel code, 2545K rwdata, 7568K rodata, 2412K init, 3680K bss, 210468K reserved, 0K cma-reserved)
Jan 23 20:55:55 matrix kernel: [ 3.216030] Write protecting the kernel read-only data: 22528k
Jan 23 20:55:55 matrix kernel: [ 3.218149] Freeing unused kernel image (text/rodata gap) memory: 2040K
Jan 23 20:55:55 matrix kernel: [ 3.218805] Freeing unused kernel image (rodata/data gap) memory: 624K
Jan 23 20:55:55 matrix kernel: [ 3.935828] libata version 3.00 loaded.
Jan 23 20:55:55 matrix kernel: [ 4.046762] scsi host0: pata_atiixp
Jan 23 20:55:55 matrix kernel: [ 4.060013] scsi host2: pata_atiixp
Jan 23 20:55:55 matrix kernel: [ 4.060161] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf100 irq 14
Jan 23 20:55:55 matrix kernel: [ 4.060165] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf108 irq 15
Jan 23 20:55:55 matrix kernel: [ 4.073345] ata3: SATA max UDMA/133 abar m2048@0xfeb4f000 port 0xfeb4f100 irq 27
Jan 23 20:55:55 matrix kernel: [ 4.073351] ata4: SATA max UDMA/133 abar m2048@0xfeb4f000 port 0xfeb4f180 irq 27
Jan 23 20:55:55 matrix kernel: [ 4.073354] ata5: DUMMY
Jan 23 20:55:55 matrix kernel: [ 4.073358] ata6: SATA max UDMA/133 abar m2048@0xfeb4f000 port 0xfeb4f280 irq 27
Jan 23 20:55:55 matrix kernel: [ 4.393483] ata6: SATA link down (SStatus 0 SControl 300)
Jan 23 20:55:55 matrix kernel: [ 4.551854] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Jan 23 20:55:55 matrix kernel: [ 4.551899] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Jan 23 20:55:55 matrix kernel: [ 4.552603] ata3.00: ATA-8: ST1000DM003-1CH162, CC56, max UDMA/100
Jan 23 20:55:55 matrix kernel: [ 4.552611] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
Jan 23 20:55:55 matrix kernel: [ 4.552734] ata4.00: ATA-9: ST1000DM003-1CH162, CC47, max UDMA/133
Jan 23 20:55:55 matrix kernel: [ 4.552757] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
Jan 23 20:55:55 matrix kernel: [ 4.553378] ata3.00: configured for UDMA/100
Jan 23 20:55:55 matrix kernel: [ 4.574714] ata4.00: configured for UDMA/133
Jan 23 20:55:55 matrix kernel: [ 7.884610] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
Jan 23 20:55:55 matrix kernel: [ 13.440754] acpi_cpufreq: overriding BIOS provided _PSD data
Jan 23 20:55:55 matrix kernel: [ 15.580919] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
Jan 23 20:55:55 matrix kernel: [ 16.639626] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
Jan 23 20:55:55 matrix kernel: [ 16.765173] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
Jan 23 20:55:55 matrix kernel: [ 16.961632] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
Jan 23 20:56:35 matrix kernel: [ 64.187263] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Jan 23 20:56:35 matrix kernel: [ 64.189433] ata3.00: configured for UDMA/100