Wifi Absent

dezix · 08 avr. 2022, 14:51

PascalHambourg a écrit : ↑08 avr. 2022, 14:06 Je ne pense pas. Donc si le module a besoin d'un firmware pour ce contrôleur, il faudra probablement aussi installer le paquet firmware-realtek des backports.

Justement pas de paquet firmware-realtek dans les backports de bullseye,
mais la dernière ligne de description du paquet stable indique :

Realtek RTL8852A firmware, version v0.9.12.2 (rtw89/rtw8852a_fw.bin)

ce qui pourrait signifier que selon ce qui est fourni par le noyau, le paquet serait prévu pour adapter ?

dezix · 08 avr. 2022, 17:22

dezix a écrit : ↑08 avr. 2022, 14:51
PascalHambourg a écrit : ↑08 avr. 2022, 14:06 Donc si le module a besoin d'un firmware pour ce contrôleur, il faudra probablement aussi installer le paquet firmware-realtek des backports.

Justement pas de paquet firmware-realtek dans les backports de bullseye,
mais la dernière ligne de description du paquet stable indique :

Realtek RTL8852A firmware, version v0.9.12.2 (rtw89/rtw8852a_fw.bin)
ce qui pourrait signifier que selon ce qui est fourni par le noyau, le paquet serait prévu pour adapter ?

jandelalune · 08 avr. 2022, 17:48

le 08/04/2022
Poursuite de la recherche du pilote wifi qui va bien

Salut et merci à tous pour vos réponses rapides
piratebab a écrit :

On sait que ton device id est 10ec:8852

piratebab a écrit :

Pour voir comment ton système actuel le prends en ton device:

lspci -vv -s 10ec:8852

au terminal :j'ai le ,résultat suivant :

Code : Tout sélectionner

gerard@VICTUSG:~$ lspci -vv -s 10ec:8852  
lspci: -s: Invalid bus number
gerard@VICTUSG:~$

Mon aventure se termine vite !!!

En attendant du secours je cherche si je peux trouver une erreur d'écriture, mais cela risque de prendre du temps : je ne sais pas vraiment ou chercher dans tout ce que vous m'avez déjà proposé

A + j'espère
Cordialement

jandelalune · 08 avr. 2022, 19:18

08/04/2022 Suite
piratebab a écrit :

Pour rechercher si un noyau installé a un module pour l'identifiant 10ec:8852 sans avoir le composant dans la machine, j'ai deux méthodes :

grep -i "10ec.*8852" /lib/modules/"<version>"/modules.alias
/sbin/modprobe -R "pci:v000010ECd00008852sv*sd*bc*sc*i*"

au terminal j’ai :

1 /

Code : Tout sélectionner

gerard@VICTUSG:~$ grep -i "10ec.*8852" /lib/modules/"<version>"/modules.alias
grep: /lib/modules/<version>/modules.alias: Aucun fichier ou dossier de ce type
gerard@VICTUSG:~$

2 /

Code : Tout sélectionner

gerard@VICTUSG:~$ /sbin/modprobe -R "pci:v000010ECd00008852sv*sd*bc*sc*i*"
modprobe: FATAL: Module pci:v000010ECd00008852sv*sd*bc*sc*i* not found in directory /lib/modules/5.10.0-13-amd64
gerard@VICTUSG:~$

J’ai vérifier

Code : Tout sélectionner

 
root@VICTUSG:~# lspci -nnkd ::0280
03:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. Device [10ec:8852]
	DeviceName: Realtek Wireless LAN + BT
	Subsystem: Hewlett-Packard Company Device [103c:88e1]
root@VICTUSG:~# 

J’ai poussé jusque au sous systeme à tout hasard

[code]
root@VICTUSG:~# lspci -vv -s 103c:88e1
lspci: -s: Invalid bus number
root@VICTUSG:~#

Voilà j'ai terminé ce que je pensai pouvoir en espérant que çe sera utile

Merci à tous
A+

08 avr. 2022, 19:48

une info interessante, dans https://linux-hardware.org/?id=pci:10ec-8852-103c-88e1
Il te faut à minima un kernel 5.16.
le module qui doit être chargé est bien le rtw89 (inclu dans kernel 5.16)
Ou en es tu de l'installation du kernel des backports ? Tu y trouveras linux-image-5.16.xxxx
Pour savoir quelle version du kernel 5.16 à installer, tu regardes dans synaptic quel kernel tu as actuellement, et tu prends le même en version 5.16

08 avr. 2022, 22:00

dezix a écrit : ↑08 avr. 2022, 14:51 Justement pas de paquet firmware-realtek dans les backports de bullseye,
mais la dernière ligne de description du paquet stable indique :
Realtek RTL8852A firmware, version v0.9.12.2 (rtw89/rtw8852a_fw.bin)
ce qui pourrait signifier que selon ce qui est fourni par le noyau, le paquet serait prévu pour adapter ?

Non, ça veut juste dire que le paquet firmware-realtek de bullseye est en avance sur le noyau.
Bref, installer seulement le noyau des backports comme indiqué précédemment et arrêter de tourner en rond...

08 avr. 2022, 22:02

jandelalune a écrit : ↑08 avr. 2022, 19:18 en espérant que çe sera utile

Non, strictement aucun intérêt. Arrête de tourner en rond et installe le noyau des backports comme indiqué précédemment.

jandelalune · 09 avr. 2022, 16:40

Bonjour à tous et merci pour votre présence

A ce stade j’avoue que j’ai du mal à suivre : en fait j, j’ai l’impression de me noyer

le 08/04
piratebab à écrit :

Reprenons les choses dans l'ordre.
On sait que ton device id est 10ec:8852

Pour voir comment ton système actuel le prends en charge:
Avec cet identifiant, on trouve normalement sur internet le driver requis. Mais la page https://deviwiki.com/wiki/List_of_Wi-Fi ... s_in_Linux me renvoit un tableau vide aujourd’hui (ça fait longtemps que je ne l'ai plus utilisé). Vous auriez un lien qui fonctionne ?
La liste des drivrs existant est sur https://wireless.wiki.kernel.org/en/users/Drivers , mais il n'y a pas la liste des devices ID supportés.

Pour voir comment ton système actuel le prends en ton device:

avec une succession de commande dont il m’a semblé logique de donner les résultats chez moi, d’autant qu’ils sont tous négatifs

Il est vrai que j’ai rajouté d’autres résultats que j’ai cru utiles et qui ne le sont pas : c’est la preuve de ce que je dis plus haut : je suis perdu

Je n’ai pas du tout l’intention de polémiquer ou de faire un procès d’intention à quiconque, donc j’arrête là et j’adhère à ce qu’a écrit PascalHambourg à 2 reprises

Bref, installer seulement le noyau des backports comme indiqué précédemment et arrêter de tourner en rond…

confirmé d’alleurs par piratebab

Ou en es tu de l'installation du kernel des backports ?

Sur ce plan

1 /
j’ai complété ma sourceslist :

deb http://deb.debian.org/debian bullseye main contrib non-free
deb-src http://deb.debian.org/debian bullseye main contrib non-free

deb http://deb.debian.org/debian-security/ bullseye-security main contrib non-free>
deb-src http://deb.debian.org/debian-security/ bullseye-security main contrib non-free>

deb http://deb.debian.org/debian bullseye-updates main contrib non-free
deb-src http://deb.debian.org/debian bullseye-updates main contrib non-free

deb http://deb.debian.org/debian bullseye-backports main contrib non-free

2/
J’ai mis à jour le cache d’apt

3/
Je connais ma version du noyau :

Linux VICTUSG 5.10.0-13-amd64 #1 SMP Debian 5.10.106-1 (2022-03-17) x86_64 GNU/Linux
gerard@VICTUSG:~$

gerard@VICTUSG:~$ cat /proc/version
Linux version 5.10.0-13-amd64 (debian-kernel@lists.debian.org) (gcc-10 (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Debian 5.10.106-1 (2022-03-17)
gerard@VICTUSG:~$

4 / au terminal j’ai installé :

Code : Tout sélectionner

root@VICTUSG:~# apt -t bullseye-backports install linux-image-amd64 
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances... Fait
Lecture des informations d'état... Fait      
Les paquets supplémentaires suivants seront installés : 
  linux-image-5.16.0-0.bpo.4-amd64
Paquets suggérés :
  linux-doc-5.16 debian-kernel-handbook
Les NOUVEAUX paquets suivants seront installés :
  linux-image-5.16.0-0.bpo.4-amd64
Les paquets suivants seront mis à jour :
  linux-image-amd64
1 mis à jour, 1 nouvellement installés, 0 à enlever et 134 non mis à jour.
Il est nécessaire de prendre 67,9 Mo dans les archives.
Après cette opération, 452 Mo d'espace disque supplémentaires seront utilisés.
Souhaitez-vous continuer ? [O/n] o
Réception de :1 http://deb.debian.org/debian bullseye-backports/main amd64 linux-image-5.16.0-0.bpo.4-amd64 amd64 5.16.12-1~bpo11+1 [67,9 MB]
Réception de :2 http://deb.debian.org/debian bullseye-backports/main amd64 linux-image-amd64 amd64 5.16.12-1~bpo11+1 [1 500 B]
67,9 Mo réceptionnés en 54s (1 248 ko/s)                                       
Lecture des fichiers de modifications (« changelog »)... Terminé
Sélection du paquet linux-image-5.16.0-0.bpo.4-amd64 précédemment désélectionné.
(Lecture de la base de données... 256856 fichiers et répertoires déjà installés.
)
Préparation du dépaquetage de .../linux-image-5.16.0-0.bpo.4-amd64_5.16.12-1~bpo
11+1_amd64.deb ...
Dépaquetage de linux-image-5.16.0-0.bpo.4-amd64 (5.16.12-1~bpo11+1) ...
Préparation du dépaquetage de .../linux-image-amd64_5.16.12-1~bpo11+1_amd64.deb 
...
Dépaquetage de linux-image-amd64 (5.16.12-1~bpo11+1) sur (5.10.106-1) ...
Paramétrage de linux-image-5.16.0-0.bpo.4-amd64 (5.16.12-1~bpo11+1) ...
I: /vmlinuz.old is now a symlink to boot/vmlinuz-5.10.0-13-amd64
I: /initrd.img.old is now a symlink to boot/initrd.img-5.10.0-13-amd64
I: /vmlinuz is now a symlink to boot/vmlinuz-5.16.0-0.bpo.4-amd64
I: /initrd.img is now a symlink to boot/initrd.img-5.16.0-0.bpo.4-amd64
/etc/kernel/postinst.d/dkms:
dkms: running auto installation service for kernel 5.16.0-0.bpo.4-amd64:Error! Y
our kernel headers for kernel 5.16.0-0.bpo.4-amd64 cannot be found.
Please install the linux-headers-5.16.0-0.bpo.4-amd64 package,
or use the --kernelsourcedir option to tell DKMS where it's located
Error! Your kernel headers for kernel 5.16.0-0.bpo.4-amd64 cannot be found.
Please install the linux-headers-5.16.0-0.bpo.4-amd64 package,
or use the --kernelsourcedir option to tell DKMS where it's located
.
/etc/kernel/postinst.d/initramfs-tools:
update-initramfs: Generating /boot/initrd.img-5.16.0-0.bpo.4-amd64
W: Possible missing firmware /lib/firmware/amdgpu/yellow_carp_gpu_info.bin for m
odule amdgpu
……………..
……………..
W: Possible missing firmware /lib/firmware/amdgpu/vangogh_dmcub.bin for module a
mdgpu
W: Possible missing firmware /lib/firmware/amdgpu/navy_flounder_dmcub.bin for mo
dule amdgpu
/etc/kernel/postinst.d/zz-update-grub:
Generating grub configuration file ...
Found background image: /usr/share/images/desktop-base/desktop-grub.png
Found linux image: /boot/vmlinuz-5.16.0-0.bpo.4-amd64
Found initrd image: /boot/initrd.img-5.16.0-0.bpo.4-amd64
Found linux image: /boot/vmlinuz-5.10.0-13-amd64
Found initrd image: /boot/initrd.img-5.10.0-13-amd64
Found linux image: /boot/vmlinuz-5.10.0-12-amd64
Found initrd image: /boot/initrd.img-5.10.0-12-amd64
Found Windows Boot Manager on /dev/nvme0n1p1@/EFI/Microsoft/Boot/bootmgfw.efi
Adding boot menu entry for EFI firmware configuration
done
Paramétrage de linux-image-amd64 (5.16.12-1~bpo11+1) ...
root@VICTUSG:~#

5 /
Mise àjour

Code : Tout sélectionner

oot@VICTUSG:~# apt update
Atteint :1 http://deb.debian.org/debian bullseye InRelease
Atteint :2 http://deb.debian.org/debian-security bullseye-security InRelease
Atteint :3 http://deb.debian.org/debian bullseye-updates InRelease
Atteint :4 http://deb.debian.org/debian bullseye-backports InRelease
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances... Fait
Lecture des informations d'état... Fait      
4 paquets peuvent être mis à jour. Exécutez « apt list --upgradable » pour les voir.
root@VICTUSG:~# apt upgrade
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances... Fait
Lecture des informations d'état... Fait      
Calcul de la mise à jour... Fait
Les paquets suivants ont été installés automatiquement et ne sont plus nécessaires :
  linux-headers-5.10.0-12-amd64 linux-headers-5.10.0-12-common
  linux-image-5.10.0-12-amd64
Veuillez utiliser « apt autoremove » pour les supprimer.
Les paquets suivants seront mis à jour :
  gir1.2-javascriptcoregtk-4.0 gir1.2-webkit2-4.0 libjavascriptcoregtk-4.0-18
  libwebkit2gtk-4.0-37
4 mis à jour, 0 nouvellement installés, 0 à enlever et 0 non mis à jour.
Il est nécessaire de prendre 0 o/19,1 Mo dans les archives.
Après cette opération, 3 129 ko d'espace disque seront libérés.
Souhaitez-vous continuer ? [O/n] o
Lecture des fichiers de modifications (« changelog »)... Terminé
(Lecture de la base de données... 261735 fichiers et répertoires déjà installés.
)
Préparation du dépaquetage de .../gir1.2-webkit2-4.0_2.36.0-3~deb11u1_amd64.deb 
...
Dépaquetage de gir1.2-webkit2-4.0:amd64 (2.36.0-3~deb11u1) sur (2.34.6-1~deb11u1
) ...
Préparation du dépaquetage de .../gir1.2-javascriptcoregtk-4.0_2.36.0-3~deb11u1_
amd64.deb ...
Dépaquetage de gir1.2-javascriptcoregtk-4.0:amd64 (2.36.0-3~deb11u1) sur (2.34.6
-1~deb11u1) ...
Préparation du dépaquetage de .../libwebkit2gtk-4.0-37_2.36.0-3~deb11u1_amd64.de
b ...
Dépaquetage de libwebkit2gtk-4.0-37:amd64 (2.36.0-3~deb11u1) sur (2.34.6-1~deb11
u1) ...
Préparation du dépaquetage de .../libjavascriptcoregtk-4.0-18_2.36.0-3~deb11u1_a
md64.deb ...
Dépaquetage de libjavascriptcoregtk-4.0-18:amd64 (2.36.0-3~deb11u1) sur (2.34.6-
1~deb11u1) ...
Paramétrage de libjavascriptcoregtk-4.0-18:amd64 (2.36.0-3~deb11u1) ...
Paramétrage de gir1.2-javascriptcoregtk-4.0:amd64 (2.36.0-3~deb11u1) ...
Paramétrage de libwebkit2gtk-4.0-37:amd64 (2.36.0-3~deb11u1) ...
Paramétrage de gir1.2-webkit2-4.0:amd64 (2.36.0-3~deb11u1) ...
Traitement des actions différées (« triggers ») pour libc-bin (2.31-13+deb11u3) 
...
root@VICTUSG:~#

d’ailleurs ça n’a pas suffit pour modifier les résultats de l’installation : pour avoir la 5,16 il a fallu redémarrer

6 / Vérification de la version téléchargée
[/code]
gerard@VICTUSG:~$ cat /proc/version
Linux version 5.16.0-0.bpo.4-amd64 (debian-kernel@lists.debian.org) (gcc-10 (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP PREEMPT Debian 5.16.12-1~bpo11+1 (2022-03-08)
gerard@VICTUSG:~$
[/code]

Est ce correct ??
En attendant je vais continuer à étudier dans tout ce qui m'a été dit ce qui est à retenir pour continuer à aboutir mon projet

Merci à tous pour votre patience
A+

09 avr. 2022, 18:54

Maintenant que le noyau 5.16 est actif, tu peux relancer

Code : Tout sélectionner

lspci -nnkd ::280

pour voir si le module rtw89_pci est bien associé au contrôleur wifi et utilisé (in use).
Si oui, l'interface wifi devrait être listée par

Code : Tout sélectionner

ip link

Si non, examiner les logs du noyau avec

Code : Tout sélectionner

dmesg | grep -Ei "firmware|rtw89|03:00\.0"

PS: pourquoi dkms est-il installé ? As-tu installé un pilote externe (nvidia, virtualbox...) ? Dans ce cas il faudra installer le paquet linux-headers-amd64 des backports.

jandelalune · 10 avr. 2022, 11:20

Bonjour PascalHambourg et merci
Navré mais j’ai été obligé de scinder à nouveau mon envoi pour cause de volume : l’aperçu et l’envoi m’ont été refusé et je n’ai pas trouvé d’autre méthode pour répondre

PascalHambourg a écrit : maintenant tu peux lancer
lspci -nnkd ::280
pour voir si le module rtw89_pci est bien associé au contrôleur wifi et utilisé (in use).
Si oui, l'interface wifi devrait être listée par
Code : Tout sélectionner
ip linki
Si non, examiner les logs du noyau avec
Code : Tout sélectionner
dmesg | grep -Ei "firmware|rtw89|03:00\.0|

1 /
gerard@VICTUSG:~$ lspci -nnkd ::280
03:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. Device [10ec:8852]
DeviceName: Realtek Wireless LAN + BT
Subsystem: Hewlett-Packard Company Device [103c:88e1]
Kernel driver in use: rtw89_pci
Kernel modules: rtw89_pci
gerard@VICTUSG:~$
[/code]
2 /

Code : Tout sélectionner

root@VICTUSG:~# ip linki
Object "linki" is unknown, try "ip help".
root@VICTUSG:~#

3 / 1ere partie

Code : Tout sélectionner

gerard@VICTUSG:~$ su -
Mot de passe : 
root@VICTUSG:~# dmesg | grep -Ei "firmware|rtw89|03:00\.0|"
[    0.000000] Linux version 5.16.0-0.bpo.4-amd64 (debian-kernel@lists.debian.org) (gcc-10 (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP PREEMPT Debian 5.16.12-1~bpo11+1 (2022-03-08)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.16.0-0.bpo.4-amd64 root=UUID=db4446de-5bec-4ace-8432-f9196b1c7989 ro quiet
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[9]:  832, xstate_sizes[9]:    8
[    0.000000] x86/fpu: Enabled xstate features 0x207, context size is 840 bytes, using 'compacted' format.
[    0.000000] signal: max sigframe size: 3376
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009eeffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000009ef0000-0x000000000a000fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000000a001000-0x000000000a1fffff] usable
[    0.000000] BIOS-e820: [mem 0x000000000a200000-0x000000000a20efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000000a20f000-0x00000000b6efbfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000b6efc000-0x00000000b7052fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b7053000-0x00000000b70cdfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000b70ce000-0x00000000b72c1fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000b72c2000-0x00000000bcb83fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bcb84000-0x00000000bcbfdfff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000bcbfe000-0x00000000bdffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000be000000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fd000000-0x00000000fdffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe700000-0x00000000fe700fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fedc4000-0x00000000fedc9fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fedcc000-0x00000000fedcefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fedd5000-0x00000000fedd5fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041e2fffff] usable
[    0.000000] BIOS-e820: [mem 0x000000041e300000-0x000000043fffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.70 by American Megatrends
[    0.000000] efi: ACPI=0xb70cd000 ACPI 2.0=0xb70cd014 TPMFinalLog=0xb7277000 SMBIOS=0xbca12000 SMBIOS 3.0=0xbca11000 MEMATTR=0xb3b9c698 ESRT=0xb4174918 MOKvar=0xb3b6c000 
[    0.000000] secureboot: Secure boot could not be determined (mode 0)
[    0.000000] SMBIOS 3.3.0 present.
[    0.000000] DMI: HP Victus by HP Laptop 16-e0xxx/88EC, BIOS F.11 09/14/2021
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3293.978 MHz processor
[    0.000127] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000128] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000133] last_pfn = 0x41e300 max_arch_pfn = 0x400000000
[    0.000368] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000596] last_pfn = 0xbe000 max_arch_pfn = 0x400000000
[    0.003310] esrt: Reserving ESRT space from 0x00000000b4174918 to 0x00000000b4174950.
[    0.003314] e820: update [mem 0xb4174000-0xb4174fff] usable ==> reserved
[    0.003324] e820: update [mem 0xb3b6c000-0xb3b6efff] usable ==> reserved
[    0.003335] Using GB pages for direct mapping
[    0.003776] RAMDISK: [mem 0x2e69b000-0x33344fff]
[    0.003780] ACPI: Early table checksum verification disabled
[    0.003782] ACPI: RSDP 0x00000000B70CD014 000024 (v02 HPQOEM)
[    0.003785] ACPI: XSDT 0x00000000B70CC728 00010C (v01 HPQOEM SLIC-MPC 01072009 AMI  01000013)
[    0.003788] ACPI: FACP 0x00000000B70BD000 000114 (v06 HPQOEM SLIC-MPC 01072009 HP   00010013)
[    0.003791] ACPI: DSDT 0x00000000B70A3000 01920E (v02 HPQOEM 88EC     01072009 ACPI 20190509)
[    0.003793] ACPI: FACS 0x00000000B7275000 000040
[    0.003794] ACPI: MSDM 0x00000000B70CB000 000055 (v03 HPQOEM SLIC-MPC 00000001 HP   00010013)
[    0.003796] ACPI: SSDT 0x00000000B70C3000 00723C (v02 HPQOEM 88EC     00000002 ACPI 04000000)
[    0.003797] ACPI: IVRS 0x00000000B70C2000 0001A4 (v02 HPQOEM 88EC     00000001 HP   00000000)
[    0.003799] ACPI: SSDT 0x00000000B70BE000 003A21 (v01 HPQOEM 88EC     00000001 ACPI 20190509)
[    0.003800] ACPI: FIDT 0x00000000B70A2000 00009C (v01 HPQOEM 88EC     01072009 HP   00010013)
[    0.003802] ACPI: MCFG 0x00000000B70A1000 00003C (v01 HPQOEM 88EC     01072009 HP   00010013)
[    0.003803] ACPI: HPET 0x00000000B70A0000 000038 (v01 HPQOEM 88EC     01072009 HP   00000005)
[    0.003805] ACPI: VFCT 0x00000000B7092000 00D884 (v01 HPQOEM 88EC     00000001 HP   31504F47)
[    0.003806] ACPI: SSDT 0x00000000B7091000 000060 (v01 HPQOEM 88EC     00000001 ACPI 20190509)
[    0.003807] ACPI: TPM2 0x00000000B7090000 00004C (v04 HPQOEM 88EC     00000001 HP   00000000)
[    0.003809] ACPI: SSDT 0x00000000B708C000 003E88 (v02 HPQOEM 88EC     00000001 ACPI 00000001)
[    0.003810] ACPI: CRAT 0x00000000B708B000 000B68 (v01 HPQOEM 88EC     00000001 HP   00000001)
[    0.003812] ACPI: CDIT 0x00000000B708A000 000029 (v01 HPQOEM 88EC     00000001 HP   00000001)
[    0.003813] ACPI: SSDT 0x00000000B7087000 002C78 (v01 HPQOEM 88EC     00001000 ACPI 20190509)
[    0.003815] ACPI: SSDT 0x00000000B7086000 000149 (v01 HPQOEM 88EC     00000001 ACPI 20190509)
[    0.003816] ACPI: SSDT 0x00000000B7085000 000641 (v01 HPQOEM 88EC     00000001 ACPI 20190509)
[    0.003817] ACPI: SSDT 0x00000000B7084000 00064F (v01 HPQOEM 88EC     00000001 ACPI 20190509)
[    0.003819] ACPI: SSDT 0x00000000B7082000 00148E (v01 HPQOEM 88EC     00000001 ACPI 20190509)
[    0.003820] ACPI: SSDT 0x00000000B7080000 001515 (v01 HPQOEM 88EC     00000001 ACPI 20190509)
[    0.003822] ACPI: SSDT 0x00000000B707F000 00062D (v01 HPQOEM 88EC     00000001 ACPI 20190509)
[    0.003823] ACPI: SSDT 0x00000000B7079000 0036E9 (v01 HPQOEM 88EC     00000001 ACPI 20190509)
[    0.003825] ACPI: WSMT 0x00000000B707E000 000028 (v01 HPQOEM 88EC     01072009 HP   00010013)
[    0.003826] ACPI: APIC 0x00000000B707D000 0000DE (v03 HPQOEM 88EC     01072009 HP   00010013)
[    0.003828] ACPI: SSDT 0x00000000B7078000 00008D (v01 HPQOEM 88EC     00000001 ACPI 20190509)
[    0.003829] ACPI: SSDT 0x00000000B7077000 0008A8 (v01 HPQOEM 88EC     00000001 ACPI 20190509)
[    0.003830] ACPI: SSDT 0x00000000B7075000 00108C (v01 HPQOEM 88EC     00000001 ACPI 20190509)
[    0.003832] ACPI: FPDT 0x00000000B7074000 000044 (v01 HPQOEM 88EC     01072009 HP   01000013)
[    0.003833] ACPI: BGRT 0x00000000B7073000 000038 (v01 HPQOEM 88EC     01072009 HP   00010013)
[    0.003835] ACPI: Reserving FACP table memory at [mem 0xb70bd000-0xb70bd113]
[    0.003836] ACPI: Reserving DSDT table memory at [mem 0xb70a3000-0xb70bc20d]
[    0.003836] ACPI: Reserving FACS table memory at [mem 0xb7275000-0xb727503f]
[    0.003837] ACPI: Reserving MSDM table memory at [mem 0xb70cb000-0xb70cb054]
[    0.003837] ACPI: Reserving SSDT table memory at [mem 0xb70c3000-0xb70ca23b]
[    0.003838] ACPI: Reserving IVRS table memory at [mem 0xb70c2000-0xb70c21a3]
[    0.003838] ACPI: Reserving SSDT table memory at [mem 0xb70be000-0xb70c1a20]
[    0.003839] ACPI: Reserving FIDT table memory at [mem 0xb70a2000-0xb70a209b]
[    0.003839] ACPI: Reserving MCFG table memory at [mem 0xb70a1000-0xb70a103b]
[    0.003840] ACPI: Reserving HPET table memory at [mem 0xb70a0000-0xb70a0037]
[    0.003840] ACPI: Reserving VFCT table memory at [mem 0xb7092000-0xb709f883]
[    0.003841] ACPI: Reserving SSDT table memory at [mem 0xb7091000-0xb709105f]
[    0.003841] ACPI: Reserving TPM2 table memory at [mem 0xb7090000-0xb709004b]
[    0.003842] ACPI: Reserving SSDT table memory at [mem 0xb708c000-0xb708fe87]
[    0.003842] ACPI: Reserving CRAT table memory at [mem 0xb708b000-0xb708bb67]
[    0.003843] ACPI: Reserving CDIT table memory at [mem 0xb708a000-0xb708a028]
[    0.003843] ACPI: Reserving SSDT table memory at [mem 0xb7087000-0xb7089c77]
[    0.003844] ACPI: Reserving SSDT table memory at [mem 0xb7086000-0xb7086148]
[    0.003844] ACPI: Reserving SSDT table memory at [mem 0xb7085000-0xb7085640]
[    0.003845] ACPI: Reserving SSDT table memory at [mem 0xb7084000-0xb708464e]
[    0.003845] ACPI: Reserving SSDT table memory at [mem 0xb7082000-0xb708348d]
[    0.003846] ACPI: Reserving SSDT table memory at [mem 0xb7080000-0xb7081514]
[    0.003846] ACPI: Reserving SSDT table memory at [mem 0xb707f000-0xb707f62c]
[    0.003847] ACPI: Reserving SSDT table memory at [mem 0xb7079000-0xb707c6e8]
[    0.003847] ACPI: Reserving WSMT table memory at [mem 0xb707e000-0xb707e027]
[    0.003848] ACPI: Reserving APIC table memory at [mem 0xb707d000-0xb707d0dd]
[    0.003849] ACPI: Reserving SSDT table memory at [mem 0xb7078000-0xb707808c]
[    0.003849] ACPI: Reserving SSDT table memory at [mem 0xb7077000-0xb70778a7]
[    0.003850] ACPI: Reserving SSDT table memory at [mem 0xb7075000-0xb707608b]
[    0.003850] ACPI: Reserving FPDT table memory at [mem 0xb7074000-0xb7074043]
[    0.003851] ACPI: Reserving BGRT table memory at [mem 0xb7073000-0xb7073037]
[    0.003902] No NUMA configuration found
[    0.003903] Faking a node at [mem 0x0000000000000000-0x000000041e2fffff]
[    0.003908] NODE_DATA(0) allocated [mem 0x41e2d5000-0x41e2fffff]
[    0.004111] Zone ranges:
[    0.004111]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.004113]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.004114]   Normal   [mem 0x0000000100000000-0x000000041e2fffff]
[    0.004115]   Device   empty
[    0.004115] Movable zone start for each node
[    0.004117] Early memory node ranges
[    0.004117]   node   0: [mem 0x0000000000001000-0x000000000009ffff]
[    0.004118]   node   0: [mem 0x0000000000100000-0x0000000009eeffff]
[    0.004118]   node   0: [mem 0x000000000a001000-0x000000000a1fffff]
[    0.004119]   node   0: [mem 0x000000000a20f000-0x00000000b6efbfff]
[    0.004119]   node   0: [mem 0x00000000bcbfe000-0x00000000bdffffff]
[    0.004120]   node   0: [mem 0x0000000100000000-0x000000041e2fffff]
[    0.004121] Initmem setup node 0 [mem 0x0000000000001000-0x000000041e2fffff]
[    0.004124] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.004139] On node 0, zone DMA: 96 pages in unavailable ranges
[    0.004270] On node 0, zone DMA32: 273 pages in unavailable ranges
[    0.007502] On node 0, zone DMA32: 15 pages in unavailable ranges
[    0.007657] On node 0, zone DMA32: 23810 pages in unavailable ranges
[    0.007862] On node 0, zone Normal: 8192 pages in unavailable ranges
[    0.007900] On node 0, zone Normal: 7424 pages in unavailable ranges
[    0.011328] ACPI: PM-Timer IO Port: 0x808
[    0.011337] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.011351] IOAPIC[0]: apic_id 33, version 33, address 0xfec00000, GSI 0-23
[    0.011357] IOAPIC[1]: apic_id 34, version 33, address 0xfec01000, GSI 24-55
[    0.011359] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.011360] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.011363] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.011364] ACPI: HPET id: 0x10228201 base: 0xfed00000
[    0.011373] e820: update [mem 0xb2cef000-0xb32ddfff] usable ==> reserved
[    0.011384] smpboot: Allowing 16 CPUs, 4 hotplug CPUs
[    0.011405] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.011407] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.011408] PM: hibernation: Registered nosave memory: [mem 0x09ef0000-0x0a000fff]
[    0.011409] PM: hibernation: Registered nosave memory: [mem 0x0a200000-0x0a20efff]
[    0.011410] PM: hibernation: Registered nosave memory: [mem 0xb2cef000-0xb32ddfff]
[    0.011411] PM: hibernation: Registered nosave memory: [mem 0xb3b6c000-0xb3b6efff]
[    0.011412] PM: hibernation: Registered nosave memory: [mem 0xb4174000-0xb4174fff]
[    0.011414] PM: hibernation: Registered nosave memory: [mem 0xb6efc000-0xb7052fff]
[    0.011414] PM: hibernation: Registered nosave memory: [mem 0xb7053000-0xb70cdfff]
[    0.011414] PM: hibernation: Registered nosave memory: [mem 0xb70ce000-0xb72c1fff]
[    0.011415] PM: hibernation: Registered nosave memory: [mem 0xb72c2000-0xbcb83fff]
[    0.011415] PM: hibernation: Registered nosave memory: [mem 0xbcb84000-0xbcbfdfff]
[    0.011416] PM: hibernation: Registered nosave memory: [mem 0xbe000000-0xbfffffff]
[    0.011417] PM: hibernation: Registered nosave memory: [mem 0xc0000000-0xefffffff]
[    0.011417] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
[    0.011417] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfcffffff]
[    0.011418] PM: hibernation: Registered nosave memory: [mem 0xfd000000-0xfdffffff]
[    0.011418] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe6fffff]
[    0.011419] PM: hibernation: Registered nosave memory: [mem 0xfe700000-0xfe700fff]
[    0.011419] PM: hibernation: Registered nosave memory: [mem 0xfe701000-0xfeb7ffff]
[    0.011419] PM: hibernation: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
[    0.011420] PM: hibernation: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
[    0.011420] PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[    0.011421] PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
[    0.011421] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.011421] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[    0.011422] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[    0.011422] PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
[    0.011423] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[    0.011423] PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfedc3fff]
[    0.011423] PM: hibernation: Registered nosave memory: [mem 0xfedc4000-0xfedc9fff]
[    0.011424] PM: hibernation: Registered nosave memory: [mem 0xfedca000-0xfedcbfff]
[    0.011424] PM: hibernation: Registered nosave memory: [mem 0xfedcc000-0xfedcefff]
[    0.011425] PM: hibernation: Registered nosave memory: [mem 0xfedcf000-0xfedd4fff]
[    0.011425] PM: hibernation: Registered nosave memory: [mem 0xfedd5000-0xfedd5fff]
[    0.011425] PM: hibernation: Registered nosave memory: [mem 0xfedd6000-0xfeffffff]
[    0.011426] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.011427] [mem 0xc0000000-0xefffffff] available for PCI devices
[    0.011428] Booting paravirtualized kernel on bare hardware
[    0.011432] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.013783] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
[    0.014127] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u262144
[    0.014132] pcpu-alloc: s212992 r8192 d28672 u262144 alloc=1*2097152
[    0.014133] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 
[    0.014157] Fallback order for Node 0: 0 
[    0.014160] Built 1 zonelists, mobility grouping on.  Total pages: 3960394
[    0.014161] Policy zone: Normal
[    0.014162] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.16.0-0.bpo.4-amd64 root=UUID=db4446de-5bec-4ace-8432-f9196b1c7989 ro quiet
[    0.014188] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-5.16.0-0.bpo.4-amd64", will be passed to user space.
[    0.014539] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.014716] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.014749] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.027455] Memory: 2893532K/16093684K available (12295K kernel code, 2737K rwdata, 8180K rodata, 2484K init, 5212K bss, 536932K reserved, 0K cma-reserved)
[    0.027460] random: get_random_u64 called from __kmem_cache_create+0x2a/0x530 with crng_init=0
[    0.027534] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[    0.027542] ftrace: allocating 38389 entries in 150 pages
[    0.037490] ftrace: allocated 150 pages with 4 groups
[    0.037914] Dynamic Preempt: voluntary
[    0.037940] rcu: Preemptible hierarchical RCU implementation.
[    0.037941] rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=16.
[    0.037942] 	Trampoline variant of Tasks RCU enabled.
[    0.037943] 	Rude variant of Tasks RCU enabled.
[    0.037943] 	Tracing variant of Tasks RCU enabled.
[    0.037944] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.037944] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
[    0.040067] NR_IRQS: 524544, nr_irqs: 1096, preallocated irqs: 16
[    0.040330] random: crng done (trusting CPU's manufacturer)
[    0.040344] Console: colour dummy device 80x25
[    0.040352] printk: console [tty0] enabled
[    0.040363] ACPI: Core revision 20210930
[    0.040528] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.040543] APIC: Switch to symmetric I/O mode setup
[    0.041065] AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR0, rdevid:160
[    0.041066] AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR1, rdevid:160
[    0.041067] AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR2, rdevid:160
[    0.041067] AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR3, rdevid:160
[    0.041302] x2apic enabled
[    0.041308] Switched APIC routing to cluster x2apic.
[    0.041896] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.060549] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2f7b140cb60, max_idle_ns: 440795358061 ns
[    0.060554] Calibrating delay loop (skipped), value calculated using timer frequency.. 6587.95 BogoMIPS (lpj=13175912)
[    0.060556] pid_max: default: 32768 minimum: 301
[    0.061955] LSM: Security Framework initializing
[    0.061963] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.061983] AppArmor: AppArmor initialized
[    0.061985] TOMOYO Linux initialized
[    0.062024] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.062054] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.062228] x86/cpu: User Mode Instruction Prevention (UMIP) activated
[    0.062257] LVT offset 1 assigned for vector 0xf9
[    0.062372] LVT offset 2 assigned for vector 0xf4
[    0.062397] Last level iTLB entries: 4KB 512, 2MB 512, 4MB 256
[    0.062398] Last level dTLB entries: 4KB 2048, 2MB 2048, 4MB 1024, 1GB 0
[    0.062401] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.062402] Spectre V2 : Mitigation: Retpolines
[    0.062403] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.062404] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.062404] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.062405] Spectre V2 : User space: Mitigation: STIBP always-on protection
[    0.062406] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[    0.064323] Freeing SMP alternatives memory: 32K
[    0.175532] smpboot: CPU0: AMD Ryzen 5 5600H with Radeon Graphics (family: 0x19, model: 0x50, stepping: 0x0)
[    0.175644] Performance Events: Fam17h+ core perfctr, AMD PMU driver.
[    0.175648] ... version:                0
[    0.175648] ... bit width:              48
[    0.175649] ... generic registers:      6
[    0.175649] ... value mask:             0000ffffffffffff
[    0.175650] ... max period:             00007fffffffffff
[    0.175650] ... fixed-purpose events:   0
[    0.175651] ... event mask:             000000000000003f
[    0.175701] rcu: Hierarchical SRCU implementation.
[    0.175949] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.176062] smp: Bringing up secondary CPUs ...
[    0.176130] x86: Booting SMP configuration:
[    0.176131] .... node  #0, CPUs:        #1
[    0.176551] Spectre V2 : Update user space SMT mitigation: STIBP always-on
[    0.176551]   #2  #3  #4  #5  #6  #7  #8  #9 #10 #11
[    0.198605] smp: Brought up 1 node, 12 CPUs
[    0.198605] smpboot: Max logical packages: 2
[    0.198605] smpboot: Total of 12 processors activated (79055.47 BogoMIPS)
[    0.212586] node 0 deferred pages initialised in 16ms
[    0.213216] devtmpfs: initialized
[    0.213216] x86/mm: Memory block size: 128MB
[    0.213216] ACPI: PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20efff] (61440 bytes)
[    0.213216] ACPI: PM: Registering ACPI NVS region [mem 0xb70ce000-0xb72c1fff] (2048000 bytes)
[    0.213216] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.213216] futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
[    0.213216] pinctrl core: initialized pinctrl subsystem
[    0.213216] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.213216] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[    0.213216] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.213329] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.213335] audit: initializing netlink subsys (disabled)
[    0.213339] audit: type=2000 audit(1649579180.172:1): state=initialized audit_enabled=0 res=1
[    0.213339] thermal_sys: Registered thermal governor 'fair_share'
[    0.213339] thermal_sys: Registered thermal governor 'bang_bang'
[    0.213339] thermal_sys: Registered thermal governor 'step_wise'
[    0.213339] thermal_sys: Registered thermal governor 'user_space'
[    0.213339] thermal_sys: Registered thermal governor 'power_allocator'
[    0.213339] cpuidle: using governor ladder
[    0.213339] cpuidle: using governor menu
[    0.213339] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.213339] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.213339] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
[    0.213339] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
[    0.213339] PCI: Using configuration type 1 for base access
[    0.213339] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.213339] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.213339] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.216587] ACPI: Added _OSI(Module Device)
[    0.216588] ACPI: Added _OSI(Processor Device)
[    0.216588] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.216589] ACPI: Added _OSI(Processor Aggregator Device)
[    0.216589] ACPI: Added _OSI(Linux-Dell-Video)
[    0.216590] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.216590] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.226025] ACPI: 16 ACPI AML tables successfully acquired and loaded
[    0.226938] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.227973] ACPI: EC: EC started
[    0.227974] ACPI: EC: interrupt blocked
[    0.552652] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.552659] ACPI: \_SB_.PCI0.SBRG.EC0_: Boot DSDT EC used to handle transactions
[    0.552663] ACPI: Interpreter enabled
[    0.552698] ACPI: PM: (supports S0 S3 S4 S5)
[    0.552700] ACPI: Using IOAPIC for interrupt routing
[    0.553002] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.553558] ACPI: Enabled 4 GPEs in block 00 to 1F
[    0.555895] ACPI: PM: Power Resource [PG00]
[    0.559191] ACPI: PM: Power Resource [PRWL]
[    0.559204] ACPI: PM: Power Resource [PRWB]
[    0.559676] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.559680] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.559722] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR]
[    0.559796] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.559797] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.559805] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-7f] only partially covers this bridge
[    0.559993] PCI host bridge to bus 0000:00
[    0.559994] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[    0.559995] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[    0.559996] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
[    0.559997] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.559997] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
[    0.559998] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[    0.559999] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
[    0.559999] pci_bus 0000:00: root bus resource [mem 0x440000000-0xffffffffff window]
[    0.560000] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.560008] pci 0000:00:00.0: [1022:1630] type 00 class 0x060000
[    0.560073] pci 0000:00:00.2: [1022:1631] type 00 class 0x080600
[    0.560140] pci 0000:00:01.0: [1022:1632] type 00 class 0x060000
[    0.560187] pci 0000:00:01.1: [1022:1633] type 01 class 0x060400
[    0.560233] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
[    0.560379] pci 0000:00:01.2: [1022:1634] type 01 class 0x060400
[    0.560400] pci 0000:00:01.2: enabling Extended Tags
[    0.560428] pci 0000:00:01.2: PME# supported from D0 D3hot D3cold
[    0.560486] pci 0000:00:02.0: [1022:1632] type 00 class 0x060000
[    0.560533] pci 0000:00:02.1: [1022:1634] type 01 class 0x060400
[    0.560558] pci 0000:00:02.1: enabling Extended Tags
[    0.560588] pci 0000:00:02.1: PME# supported from D0 D3hot D3cold
[    0.560636] pci 0000:00:02.2: [1022:1634] type 01 class 0x060400
[    0.560682] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
[    0.560735] pci 0000:00:02.4: [1022:1634] type 01 class 0x060400
[    0.560755] pci 0000:00:02.4: enabling Extended Tags
[    0.560783] pci 0000:00:02.4: PME# supported from D0 D3hot D3cold
[    0.560833] pci 0000:00:08.0: [1022:1632] type 00 class 0x060000
[    0.560879] pci 0000:00:08.1: [1022:1635] type 01 class 0x060400
[    0.560898] pci 0000:00:08.1: enabling Extended Tags
[    0.560925] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
[    0.561003] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
[    0.561096] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
[    0.561195] pci 0000:00:18.0: [1022:166a] type 00 class 0x060000
[    0.561223] pci 0000:00:18.1: [1022:166b] type 00 class 0x060000
[    0.561249] pci 0000:00:18.2: [1022:166c] type 00 class 0x060000
[    0.561277] pci 0000:00:18.3: [1022:166d] type 00 class 0x060000
[    0.561303] pci 0000:00:18.4: [1022:166e] type 00 class 0x060000
[    0.561328] pci 0000:00:18.5: [1022:166f] type 00 class 0x060000
[    0.561354] pci 0000:00:18.6: [1022:1670] type 00 class 0x060000
[    0.561380] pci 0000:00:18.7: [1022:1671] type 00 class 0x060000
[    0.561465] pci 0000:01:00.0: [10de:25a2] type 00 class 0x030000
[    0.561473] pci 0000:01:00.0: reg 0x10: [mem 0xfb000000-0xfbffffff]
[    0.561480] pci 0000:01:00.0: reg 0x14: [mem 0xfe00000000-0xfeffffffff 64bit pref]
[    0.561486] pci 0000:01:00.0: reg 0x1c: [mem 0xff00000000-0xff01ffffff 64bit pref]
[    0.561491] pci 0000:01:00.0: reg 0x24: [io  0xf000-0xf07f]
[    0.561494] pci 0000:01:00.0: reg 0x30: [mem 0xfc000000-0xfc07ffff pref]
[    0.561541] pci 0000:01:00.0: PME# supported from D0 D3hot
[    0.561607] pci 0000:01:00.0: 63.008 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x8 link at 0000:00:01.1 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link)
[    0.561695] pci 0000:01:00.1: [10de:2291] type 00 class 0x040300
[    0.561703] pci 0000:01:00.1: reg 0x10: [mem 0xfc080000-0xfc083fff]
[    0.561797] pci 0000:00:01.1: PCI bridge to [bus 01]
[    0.561800] pci 0000:00:01.1:   bridge window [io  0xf000-0xffff]
[    0.561802] pci 0000:00:01.1:   bridge window [mem 0xfb000000-0xfc0fffff]
[    0.561804] pci 0000:00:01.1:   bridge window [mem 0xfe00000000-0xff01ffffff 64bit pref]
[    0.561855] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.561868] pci 0000:02:00.0: reg 0x10: [io  0xe000-0xe0ff]
[    0.561885] pci 0000:02:00.0: reg 0x18: [mem 0xfc904000-0xfc904fff 64bit]
[    0.561896] pci 0000:02:00.0: reg 0x20: [mem 0xfc900000-0xfc903fff 64bit]
[    0.561976] pci 0000:02:00.0: supports D1 D2
[    0.561977] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.562092] pci 0000:00:01.2: PCI bridge to [bus 02]
[    0.562095] pci 0000:00:01.2:   bridge window [io  0xe000-0xefff]
[    0.562096] pci 0000:00:01.2:   bridge window [mem 0xfc900000-0xfc9fffff]
[    0.562147] pci 0000:03:00.0: [10ec:8852] type 00 class 0x028000
[    0.562165] pci 0000:03:00.0: reg 0x10: [io  0xd000-0xd0ff]
[    0.562187] pci 0000:03:00.0: reg 0x18: [mem 0xfc800000-0xfc8fffff 64bit]
[    0.562300] pci 0000:03:00.0: supports D1 D2
[    0.562301] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.562426] pci 0000:00:02.1: PCI bridge to [bus 03]
[    0.562428] pci 0000:00:02.1:   bridge window [io  0xd000-0xdfff]
[    0.562430] pci 0000:00:02.1:   bridge window [mem 0xfc800000-0xfc8fffff]
[    0.564683] pci 0000:04:00.0: [17a0:9750] type 00 class 0x080501
[    0.564751] pci 0000:04:00.0: reg 0x10: [mem 0xfc700000-0xfc700fff]
[    0.565147] pci 0000:04:00.0: supports D1 D2
[    0.565148] pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.568739] pci 0000:00:02.2: PCI bridge to [bus 04]
[    0.568744] pci 0000:00:02.2:   bridge window [mem 0xfc700000-0xfc7fffff]
[    0.568855] pci 0000:05:00.0: [15b7:5006] type 00 class 0x010802
[    0.568873] pci 0000:05:00.0: reg 0x10: [mem 0xfc600000-0xfc603fff 64bit]
[    0.568899] pci 0000:05:00.0: reg 0x20: [mem 0xfc604000-0xfc6040ff 64bit]
[    0.569065] pci 0000:00:02.4: PCI bridge to [bus 05]
[    0.569069] pci 0000:00:02.4:   bridge window [mem 0xfc600000-0xfc6fffff]
[    0.569128] pci 0000:06:00.0: [1002:1638] type 00 class 0x030000
[    0.569140] pci 0000:06:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.569149] pci 0000:06:00.0: reg 0x18: [mem 0xe0000000-0xe01fffff 64bit pref]
[    0.569154] pci 0000:06:00.0: reg 0x20: [io  0xc000-0xc0ff]
[    0.569160] pci 0000:06:00.0: reg 0x24: [mem 0xfc500000-0xfc57ffff]
[    0.569169] pci 0000:06:00.0: enabling Extended Tags
[    0.569182] pci 0000:06:00.0: BAR 0: assigned to efifb
[    0.569230] pci 0000:06:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.569273] pci 0000:06:00.0: 126.016 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x16 link at 0000:00:08.1 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link)
[    0.569310] pci 0000:06:00.1: [1002:1637] type 00 class 0x040300
[    0.569319] pci 0000:06:00.1: reg 0x10: [mem 0xfc5c8000-0xfc5cbfff]
[    0.569344] pci 0000:06:00.1: enabling Extended Tags
[    0.569378] pci 0000:06:00.1: PME# supported from D1 D2 D3hot D3cold
[    0.569429] pci 0000:06:00.2: [1022:15df] type 00 class 0x108000
[    0.569444] pci 0000:06:00.2: reg 0x18: [mem 0xfc400000-0xfc4fffff]
[    0.569456] pci 0000:06:00.2: reg 0x24: [mem 0xfc5cc000-0xfc5cdfff]
[    0.569463] pci 0000:06:00.2: enabling Extended Tags
[    0.569548] pci 0000:06:00.3: [1022:1639] type 00 class 0x0c0330
[    0.569560] pci 0000:06:00.3: reg 0x10: [mem 0xfc300000-0xfc3fffff 64bit]
[    0.569589] pci 0000:06:00.3: enabling Extended Tags
[    0.569626] pci 0000:06:00.3: PME# supported from D0 D3hot D3cold
[    0.569681] pci 0000:06:00.4: [1022:1639] type 00 class 0x0c0330
[    0.569693] pci 0000:06:00.4: reg 0x10: [mem 0xfc200000-0xfc2fffff 64bit]
[    0.569721] pci 0000:06:00.4: enabling Extended Tags
[    0.569757] pci 0000:06:00.4: PME# supported from D0 D3hot D3cold
[    0.569813] pci 0000:06:00.5: [1022:15e2] type 00 class 0x048000
[    0.569819] pci 0000:06:00.5: reg 0x10: [mem 0xfc580000-0xfc5bffff]
[    0.569838] pci 0000:06:00.5: enabling Extended Tags
[    0.569864] pci 0000:06:00.5: PME# supported from D0 D3hot D3cold
[    0.569906] pci 0000:06:00.6: [1022:15e3] type 00 class 0x040300
[    0.569912] pci 0000:06:00.6: reg 0x10: [mem 0xfc5c0000-0xfc5c7fff]
[    0.569931] pci 0000:06:00.6: enabling Extended Tags
[    0.569957] pci 0000:06:00.6: PME# supported from D0 D3hot D3cold
[    0.570005] pci 0000:00:08.1: PCI bridge to [bus 06]
[    0.570007] pci 0000:00:08.1:   bridge window [io  0xc000-0xcfff]
[    0.570009] pci 0000:00:08.1:   bridge window [mem 0xfc200000-0xfc5fffff]
[    0.570011] pci 0000:00:08.1:   bridge window [mem 0xd0000000-0xe01fffff 64bit pref]
[    0.570401] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[    0.570429] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
[    0.570452] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[    0.570480] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[    0.570505] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[    0.570526] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[    0.570547] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[    0.570568] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[    0.571355] ACPI: EC: interrupt unblocked
[    0.571356] ACPI: EC: event unblocked
[    0.571362] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.571363] ACPI: EC: GPE=0x3
[    0.571364] ACPI: \_SB_.PCI0.SBRG.EC0_: Boot DSDT EC initialization complete
[    0.571365] ACPI: \_SB_.PCI0.SBRG.EC0_: EC: Used to handle transactions and events
[    0.571394] iommu: Default domain type: Translated 
[    0.571394] iommu: DMA domain TLB invalidation policy: lazy mode 
[    0.571394] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[    0.571394] pci 0000:06:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[    0.571394] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.571394] pci 0000:06:00.0: vgaarb: bridge control possible
[    0.571394] pci 0000:06:00.0: vgaarb: setting as boot device
[    0.571394] vgaarb: loaded
[    0.573115] EDAC MC: Ver: 3.0.0
[    0.576681] Registered efivars operations
[    0.576681] NetLabel: Initializing
[    0.576681] NetLabel:  domain hash size = 128
[    0.576681] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.576681] NetLabel:  unlabeled traffic allowed by default
[    0.576681] PCI: Using ACPI for IRQ routing
[    0.582157] PCI: pci_cache_line_size set to 64 bytes
[    0.587797] Expanded resource Reserved due to conflict with PCI Bus 0000:00
[    0.587798] e820: reserve RAM buffer [mem 0x09ef0000-0x0bffffff]
[    0.587800] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
[    0.587801] e820: reserve RAM buffer [mem 0xb2cef000-0xb3ffffff]
[    0.588552] e820: reserve RAM buffer [mem 0xb3b6c000-0xb3ffffff]
[    0.588553] e820: reserve RAM buffer [mem 0xb4174000-0xb7ffffff]
[    0.588554] e820: reserve RAM buffer [mem 0xb6efc000-0xb7ffffff]
[    0.588554] e820: reserve RAM buffer [mem 0xbe000000-0xbfffffff]
[    0.588555] e820: reserve RAM buffer [mem 0x41e300000-0x41fffffff]
[    0.588575] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.588578] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.591631] clocksource: Switched to clocksource tsc-early
[    0.592659] VFS: Disk quotas dquot_6.6.0
[    0.592667] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.592734] AppArmor: AppArmor Filesystem Enabled
[    0.592741] pnp: PnP ACPI init
[    0.592788] system 00:00: [mem 0xf0000000-0xf7ffffff] has been reserved
[    0.592941] system 00:03: [io  0x04d0-0x04d1] has been reserved
[    0.592943] system 00:03: [io  0x040b] has been reserved
[    0.592943] system 00:03: [io  0x04d6] has been reserved
[    0.592944] system 00:03: [io  0x0c00-0x0c01] has been reserved
[    0.592945] system 00:03: [io  0x0c14] has been reserved
[    0.592945] system 00:03: [io  0x0c50-0x0c51] has been reserved
[    0.592946] system 00:03: [io  0x0c52] has been reserved
[    0.592946] system 00:03: [io  0x0c6c] has been reserved
[    0.592947] system 00:03: [io  0x0c6f] has been reserved
[    0.592948] system 00:03: [io  0x0cd8-0x0cdf] has been reserved
[    0.592948] system 00:03: [io  0x0800-0x089f] has been reserved
[    0.592949] system 00:03: [io  0x0b00-0x0b0f] has been reserved
[    0.592950] system 00:03: [io  0x0b20-0x0b3f] has been reserved
[    0.592950] system 00:03: [io  0x0900-0x090f] has been reserved
[    0.592951] system 00:03: [io  0x0910-0x091f] has been reserved
[    0.592952] system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.592953] system 00:03: [mem 0xfec01000-0xfec01fff] could not be reserved
[    0.592954] system 00:03: [mem 0xfedc0000-0xfedc0fff] has been reserved
[    0.592955] system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.592956] system 00:03: [mem 0xfed80000-0xfed8ffff] could not be reserved
[    0.592957] system 00:03: [mem 0xfec10000-0xfec10fff] has been reserved
[    0.592958] system 00:03: [mem 0xff000000-0xffffffff] has been reserved
[    0.594126] pnp: PnP ACPI: found 4 devices
[    0.599388] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.599438] NET: Registered PF_INET protocol family
[    0.599618] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.600856] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    0.600931] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.601053] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.601096] TCP: Hash tables configured (established 131072 bind 65536)
[    0.601151] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
[    0.601181] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.601212] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.601258] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.601260] NET: Registered PF_XDP protocol family
[    0.601268] pci 0000:00:01.1: PCI bridge to [bus 01]
[    0.601270] pci 0000:00:01.1:   bridge window [io  0xf000-0xffff]
[    0.601272] pci 0000:00:01.1:   bridge window [mem 0xfb000000-0xfc0fffff]
[    0.601274] pci 0000:00:01.1:   bridge window [mem 0xfe00000000-0xff01ffffff 64bit pref]
[    0.601276] pci 0000:00:01.2: PCI bridge to [bus 02]
[    0.601277] pci 0000:00:01.2:   bridge window [io  0xe000-0xefff]
[    0.601279] pci 0000:00:01.2:   bridge window [mem 0xfc900000-0xfc9fffff]
[    0.601283] pci 0000:00:02.1: PCI bridge to [bus 03]
[    0.601284] pci 0000:00:02.1:   bridge window [io  0xd000-0xdfff]
[    0.601286] pci 0000:00:02.1:   bridge window [mem 0xfc800000-0xfc8fffff]
[    0.601289] pci 0000:00:02.2: PCI bridge to [bus 04]
[    0.601291] pci 0000:00:02.2:   bridge window [mem 0xfc700000-0xfc7fffff]
[    0.601294] pci 0000:00:02.4: PCI bridge to [bus 05]
[    0.601296] pci 0000:00:02.4:   bridge window [mem 0xfc600000-0xfc6fffff]
[    0.601300] pci 0000:00:08.1: PCI bridge to [bus 06]
[    0.601301] pci 0000:00:08.1:   bridge window [io  0xc000-0xcfff]
[    0.601302] pci 0000:00:08.1:   bridge window [mem 0xfc200000-0xfc5fffff]
[    0.601304] pci 0000:00:08.1:   bridge window [mem 0xd0000000-0xe01fffff 64bit pref]
[    0.601307] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[    0.601308] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[    0.601308] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
[    0.601309] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.601310] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window]
[    0.601310] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfebfffff window]
[    0.601311] pci_bus 0000:00: resource 10 [mem 0xfee00000-0xffffffff window]
[    0.601311] pci_bus 0000:00: resource 11 [mem 0x440000000-0xffffffffff window]
[    0.601312] pci_bus 0000:01: resource 0 [io  0xf000-0xffff]
[    0.601313] pci_bus 0000:01: resource 1 [mem 0xfb000000-0xfc0fffff]
[    0.601313] pci_bus 0000:01: resource 2 [mem 0xfe00000000-0xff01ffffff 64bit pref]
[    0.601314] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.601315] pci_bus 0000:02: resource 1 [mem 0xfc900000-0xfc9fffff]
[    0.601315] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    0.601316] pci_bus 0000:03: resource 1 [mem 0xfc800000-0xfc8fffff]
[    0.601316] pci_bus 0000:04: resource 1 [mem 0xfc700000-0xfc7fffff]
[    0.601317] pci_bus 0000:05: resource 1 [mem 0xfc600000-0xfc6fffff]
[    0.601317] pci_bus 0000:06: resource 0 [io  0xc000-0xcfff]
[    0.601318] pci_bus 0000:06: resource 1 [mem 0xfc200000-0xfc5fffff]
[    0.601319] pci_bus 0000:06: resource 2 [mem 0xd0000000-0xe01fffff 64bit pref]
[    0.601378] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[    0.604605] pci 0000:06:00.1: D0 power state depends on 0000:06:00.0
[    0.604609] pci 0000:06:00.3: extending delay after power-on from D3hot to 20 msec
[    0.604750] pci 0000:06:00.4: extending delay after power-on from D3hot to 20 msec
[    0.604799] PCI: CLS 64 bytes, default 64
[    0.604808] pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported
[    0.604834] pci 0000:00:00.2: can't derive routing for PCI INT A
[    0.604835] pci 0000:00:00.2: PCI INT A: not connected
[    0.604850] pci 0000:00:01.0: Adding to iommu group 0
[    0.604853] Trying to unpack rootfs image as initramfs...
[    0.604856] pci 0000:00:01.1: Adding to iommu group 1
[    0.604863] pci 0000:00:01.2: Adding to iommu group 2
[    0.604878] pci 0000:00:02.0: Adding to iommu group 3
[    0.604883] pci 0000:00:02.1: Adding to iommu group 4
[    0.604889] pci 0000:00:02.2: Adding to iommu group 5
[    0.604895] pci 0000:00:02.4: Adding to iommu group 6
[    0.604903] pci 0000:00:08.0: Adding to iommu group 7
[    0.604909] pci 0000:00:08.1: Adding to iommu group 8
[    0.604917] pci 0000:00:14.0: Adding to iommu group 9
[    0.604922] pci 0000:00:14.3: Adding to iommu group 9
[    0.604940] pci 0000:00:18.0: Adding to iommu group 10
[    0.604946] pci 0000:00:18.1: Adding to iommu group 10
[    0.604952] pci 0000:00:18.2: Adding to iommu group 10
[    0.604957] pci 0000:00:18.3: Adding to iommu group 10
[    0.604963] pci 0000:00:18.4: Adding to iommu group 10
[    0.604969] pci 0000:00:18.5: Adding to iommu group 10
[    0.604977] pci 0000:00:18.6: Adding to iommu group 10
[    0.604983] pci 0000:00:18.7: Adding to iommu group 10
[    0.604992] pci 0000:01:00.0: Adding to iommu group 11
[    0.604998] pci 0000:01:00.1: Adding to iommu group 11
[    0.605006] pci 0000:02:00.0: Adding to iommu group 12
[    0.605013] pci 0000:03:00.0: Adding to iommu group 13
[    0.605020] pci 0000:04:00.0: Adding to iommu group 14
[    0.605029] pci 0000:05:00.0: Adding to iommu group 15
[    0.605043] pci 0000:06:00.0: Adding to iommu group 16
[    0.605051] pci 0000:06:00.1: Adding to iommu group 17
[    0.605059] pci 0000:06:00.2: Adding to iommu group 18
[    0.605067] pci 0000:06:00.3: Adding to iommu group 19
[    0.605075] pci 0000:06:00.4: Adding to iommu group 20
[    0.605084] pci 0000:06:00.5: Adding to iommu group 21
[    0.605093] pci 0000:06:00.6: Adding to iommu group 22
[    0.607336] pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40
[    0.607338] AMD-Vi: Extended features (0x206d73ef22254ade): PPR X2APIC NX GT IA GA PC GA_vAPIC
[    0.607342] AMD-Vi: Interrupt remapping enabled
[    0.607342] AMD-Vi: Virtual APIC enabled
[    0.607342] AMD-Vi: X2APIC enabled
[    0.655907] software IO TLB: tearing down default memory pool
[    0.656843] LVT offset 0 assigned for vector 0x400
[    0.657097] perf: AMD IBS detected (0x000003ff)
[    0.657099] amd_uncore: 4  amd_df counters detected
[    0.657102] amd_uncore: 6  amd_l3 counters detected
[    0.657382] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
[    0.657703] Initialise system trusted keyrings
[    0.657710] Key type blacklist registered
[    0.657765] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[    0.658298] zbud: loaded
[    0.658424] integrity: Platform Keyring initialized
[    0.658425] Key type asymmetric registered
[    0.658426] Asymmetric key parser 'x509' registered
[    0.658443] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.658475] io scheduler mq-deadline registered
[    0.659633] pcieport 0000:00:01.1: PME: Signaling with IRQ 26
[    0.659650] pcieport 0000:00:01.1: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[    0.659752] pcieport 0000:00:01.2: PME: Signaling with IRQ 27
[    0.659827] pcieport 0000:00:02.1: PME: Signaling with IRQ 28
[    0.659902] pcieport 0000:00:02.2: PME: Signaling with IRQ 29
[    0.659977] pcieport 0000:00:02.4: PME: Signaling with IRQ 30
[    0.660054] pcieport 0000:00:08.1: PME: Signaling with IRQ 31
[    0.660111] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.660145] Monitor-Mwait will be used to enter C-1 state
[    0.660150] ACPI: \_SB_.PLTF.P000: Found 3 idle states
[    0.660204] ACPI: \_SB_.PLTF.P001: Found 3 idle states
[    0.660268] ACPI: \_SB_.PLTF.P002: Found 3 idle states
[    0.660331] ACPI: \_SB_.PLTF.P003: Found 3 idle states
[    0.660392] ACPI: \_SB_.PLTF.P004: Found 3 idle states
[    0.660448] ACPI: \_SB_.PLTF.P005: Found 3 idle states
[    0.660505] ACPI: \_SB_.PLTF.P006: Found 3 idle states
[    0.660547] ACPI: \_SB_.PLTF.P007: Found 3 idle states
[    0.660605] ACPI: \_SB_.PLTF.P008: Found 3 idle states
[    0.660661] ACPI: \_SB_.PLTF.P009: Found 3 idle states
[    0.660706] ACPI: \_SB_.PLTF.P00A: Found 3 idle states
[    0.660976] ACPI: \_SB_.PLTF.P00B: Found 3 idle states
[    0.662091] thermal LNXTHERM:00: registered as thermal_zone0
[    0.662092] ACPI: thermal: Thermal Zone [THRM] (46 C)
[    0.662164] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.662381] Linux agpgart interface v0.103
[    0.717594] AMD-Vi: AMD IOMMUv2 loaded and initialized
[    0.718202] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.718204] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.719122] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.719192] mousedev: PS/2 mouse device common for all mice
[    0.719229] rtc_cmos 00:01: RTC can wake from S4
[    0.719419] rtc_cmos 00:01: registered as rtc0
[    0.719448] rtc_cmos 00:01: setting system clock to 2022-04-10T08:26:21 UTC (1649579181)
[    0.719456] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.719656] ledtrig-cpu: registered to indicate activity on CPUs
[    0.719725] efifb: probing for efifb
[    0.719730] efifb: framebuffer at 0xd0000000, using 3072k, total 3072k
[    0.719731] efifb: mode is 1024x768x32, linelength=4096, pages=1
[    0.719732] efifb: scrolling: redraw
[    0.719732] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.719783] Console: switching to colour frame buffer device 128x48
[    0.720387] fb0: EFI VGA frame buffer device
[    0.720487] NET: Registered PF_INET6 protocol family
[    0.792066] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.180649] Freeing initrd memory: 78504K
[    1.185130] Segment Routing with IPv6
[    1.185138] In-situ OAM (IOAM) with IPv6
[    1.185162] mip6: Mobile IPv6
[    1.185163] NET: Registered PF_PACKET protocol family
[    1.185221] mpls_gso: MPLS GSO support
[    1.185879] microcode: CPU0: patch_level=0x0a50000c
[    1.185885] microcode: CPU1: patch_level=0x0a50000c
[    1.185900] microcode: CPU2: patch_level=0x0a50000c
[    1.185907] microcode: CPU3: patch_level=0x0a50000c
[    1.185922] microcode: CPU4: patch_level=0x0a50000c
[    1.185928] microcode: CPU5: patch_level=0x0a50000c
[    1.185944] microcode: CPU6: patch_level=0x0a50000c
[    1.185951] microcode: CPU7: patch_level=0x0a50000c
[    1.185967] microcode: CPU8: patch_level=0x0a50000c
[    1.185974] microcode: CPU9: patch_level=0x0a50000c
[    1.185990] microcode: CPU10: patch_level=0x0a50000c
[    1.185996] microcode: CPU11: patch_level=0x0a50000c
[    1.185999] microcode: Microcode Update Driver: v2.2.
[    1.186158] resctrl: L3 allocation detected
[    1.186159] resctrl: MB allocation detected
[    1.186159] resctrl: L3 monitoring detected
[    1.186163] IPI shorthand broadcast: enabled
[    1.186172] sched_clock: Marking stable (1185852954, 299533)->(1192201767, -6049280)
[    1.186413] registered taskstats version 1
[    1.186416] Loading compiled-in X.509 certificates
[    1.215303] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[    1.215312] Loaded X.509 cert 'Debian Secure Boot Signer 2021 - linux: 4b6ef5abca669825178e052c84667ccbc0531f8c'
[    1.216642] zswap: loaded using pool lzo/zbud
[    1.217399] Key type ._fscrypt registered
[    1.217401] Key type .fscrypt registered
[    1.217401] Key type fscrypt-provisioning registered
[    1.219149] Key type encrypted registered
[    1.219152] AppArmor: AppArmor sha1 policy hashing enabled
[    1.219220] integrity: Loading X.509 certificate: UEFI:db
[    1.219236] integrity: Loaded X.509 cert 'HP Inc.: HP UEFI Secure Boot DB 2017: d9c01b50cfcae89d3b05345c163aa76e5dd589e7'
[    1.219237] integrity: Loading X.509 certificate: UEFI:db
[    1.219247] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[    1.219248] integrity: Loading X.509 certificate: UEFI:db
[    1.219259] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[    1.219564] ima: Allocated hash algorithm: sha256
[    1.348899] ima: No architecture policies found
[    1.348951] evm: Initialising EVM extended attributes:
[    1.348954] evm: security.selinux
[    1.348958] evm: security.SMACK64 (disabled)
[    1.348961] evm: security.SMACK64EXEC (disabled)
[    1.348963] evm: security.SMACK64TRANSMUTE (disabled)
[    1.348964] evm: security.SMACK64MMAP (disabled)
[    1.348966] evm: security.apparmor
[    1.348967] evm: security.ima
[    1.348969] evm: security.capability
[    1.348971] evm: HMAC attrs: 0x1
[    1.398416] Freeing unused decrypted memory: 2036K
[    1.398763] Freeing unused kernel image (initmem) memory: 2484K
[    1.420832] Write protecting the kernel read-only data: 22528k
[    1.421567] Freeing unused kernel image (text/rodata gap) memory: 2040K
[    1.421652] Freeing unused kernel image (rodata/data gap) memory: 12K
[    1.445104] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.445111] Run /init as init process
[    1.445113]   with arguments:
[    1.445114]     /init
[    1.445114]   with environment:
[    1.445115]     HOME=/
[    1.445115]     TERM=linux
[    1.445116]     BOOT_IMAGE=/boot/vmlinuz-5.16.0-0.bpo.4-amd64
[    1.486166] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xff00, revision 15
[    1.486172] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
[    1.486173] hid: raw HID events driver (C) Jiri Kosina
[    1.486202] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    1.486233] ACPI: button: Power Button [PWRB]
[    1.486332] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[    1.486372] ACPI: button: Lid Switch [LID]
[    1.486393] ACPI: video: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    1.486412] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xff20
[    1.486498] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    1.486561] ACPI: button: Power Button [PWRF]
[    1.488609] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[    1.488950] acpi device:04: registered as cooling_device12
[    1.488995] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:03/LNXVIDEO:00/input/input4
[    1.489020] ACPI: video: Video Device [PEGP] (multi-head: no  rom: yes  post: no)
[    1.489036] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:32/LNXVIDEO:01/input/input5
[    1.494709] ACPI: bus type USB registered
[    1.494723] usbcore: registered new interface driver usbfs
[    1.494728] usbcore: registered new interface driver hub
[    1.494735] usbcore: registered new device driver usb
[    1.495440] ACPI: battery: Slot [BAT0] (battery present)
[    1.499028] sdhci: Secure Digital Host Controller Interface driver
[    1.499030] sdhci: Copyright(c) Pierre Ossman
[    1.499233] ACPI: bus type drm_connector registered
[    1.651175] xhci_hcd 0000:06:00.3: xHCI Host Controller
[    1.651180] xhci_hcd 0000:06:00.3: new USB bus registered, assigned bus number 1
[    1.651280] xhci_hcd 0000:06:00.3: hcc params 0x0268ffe5 hci version 0x110 quirks 0x0000020000000410
[    1.651293] input: SYNA32B9:00 06CB:CE7D Mouse as /devices/platform/AMDI0010:03/i2c-0/i2c-SYNA32B9:00/0018:06CB:CE7D.0001/input/input6
[    1.651340] input: SYNA32B9:00 06CB:CE7D Touchpad as /devices/platform/AMDI0010:03/i2c-0/i2c-SYNA32B9:00/0018:06CB:CE7D.0001/input/input7
[    1.651379] hid-generic 0018:06CB:CE7D.0001: input,hidraw0: I2C HID v1.00 Mouse [SYNA32B9:00 06CB:CE7D] on i2c-SYNA32B9:00
[    1.651625] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.16
[    1.651627] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.651629] usb usb1: Product: xHCI Host Controller
[    1.651630] usb usb1: Manufacturer: Linux 5.16.0-0.bpo.4-amd64 xhci-hcd
[    1.651632] usb usb1: SerialNumber: 0000:06:00.3
[    1.651768] hub 1-0:1.0: USB hub found
[    1.651775] hub 1-0:1.0: 4 ports detected
[    1.651958] xhci_hcd 0000:06:00.3: xHCI Host Controller
[    1.651961] xhci_hcd 0000:06:00.3: new USB bus registered, assigned bus number 2
[    1.651963] xhci_hcd 0000:06:00.3: Host supports USB 3.1 Enhanced SuperSpeed
[    1.651976] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.651992] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.16
[    1.651994] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.651996] usb usb2: Product: xHCI Host Controller
[    1.651997] usb usb2: Manufacturer: Linux 5.16.0-0.bpo.4-amd64 xhci-hcd
[    1.651998] usb usb2: SerialNumber: 0000:06:00.3

jandelalune · 10 avr. 2022, 11:32

3 / 2eme partie

Code : Tout sélectionner

[    1.652059] hub 2-0:1.0: USB hub found
[    1.652064] hub 2-0:1.0: 2 ports detected
[    1.652215] xhci_hcd 0000:06:00.4: xHCI Host Controller
[    1.652219] xhci_hcd 0000:06:00.4: new USB bus registered, assigned bus number 3
[    1.652300] xhci_hcd 0000:06:00.4: hcc params 0x0268ffe5 hci version 0x110 quirks 0x0000020000000410
[    1.652532] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.16
[    1.652533] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.652534] usb usb3: Product: xHCI Host Controller
[    1.652535] usb usb3: Manufacturer: Linux 5.16.0-0.bpo.4-amd64 xhci-hcd
[    1.652535] usb usb3: SerialNumber: 0000:06:00.4
[    1.652612] hub 3-0:1.0: USB hub found
[    1.652623] hub 3-0:1.0: 4 ports detected
[    1.652714] sdhci-pci 0000:04:00.0: SDHCI controller found [17a0:9750] (rev 1)
[    1.655961] sdhci-pci 0000:04:00.0: enabling device (0000 -> 0002)
[    1.656028] xhci_hcd 0000:06:00.4: xHCI Host Controller
[    1.656031] xhci_hcd 0000:06:00.4: new USB bus registered, assigned bus number 4
[    1.656032] xhci_hcd 0000:06:00.4: Host supports USB 3.1 Enhanced SuperSpeed
[    1.656047] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.656057] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.16
[    1.656058] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.656058] usb usb4: Product: xHCI Host Controller
[    1.656059] usb usb4: Manufacturer: Linux 5.16.0-0.bpo.4-amd64 xhci-hcd
[    1.656060] usb usb4: SerialNumber: 0000:06:00.4
[    1.659245] hub 4-0:1.0: USB hub found
[    1.659254] hub 4-0:1.0: 2 ports detected
[    1.666016] mmc0: SDHCI controller on PCI [0000:04:00.0] using ADMA
[    1.669194] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.669201] r8169 0000:02:00.0: enabling device (0000 -> 0003)
[    1.670441] nvme nvme0: pci function 0000:05:00.0
[    1.672563] tsc: Refined TSC clocksource calibration: 3293.813 MHz
[    1.672566] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2f7a784b954, max_idle_ns: 440795366813 ns
[    1.673049] clocksource: Switched to clocksource tsc
[    1.679486] nvme nvme0: 16/0/0 default/read/poll queues
[    1.682554]  nvme0n1: p1 p2 p3 p4 p5 p6 p7 p8
[    1.690640] r8169 0000:02:00.0 eth0: RTL8168h/8111h, e0:70:ea:c9:0b:b3, XID 541, IRQ 72
[    1.690646] r8169 0000:02:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[    1.691372] r8169 0000:02:00.0 eno1: renamed from eth0
[    1.816463] [drm] amdgpu kernel modesetting enabled.
[    1.816478] vga_switcheroo: detected switching method \_SB_.PCI0.GP17.VGA_.ATPX handle
[    1.816696] ATPX version 1, functions 0x00000001
[    1.816717] ATPX Hybrid Graphics
[    1.817782] amdgpu: Virtual CRAT table created for CPU
[    1.817787] amdgpu: Topology: Add CPU node
[    1.817826] checking generic (d0000000 300000) vs hw (d0000000 10000000)
[    1.817832] checking generic (d0000000 300000) vs hw (d0000000 10000000)
[    1.817833] fb0: switching to amdgpu from EFI VGA
[    1.817898] Console: switching to colour dummy device 80x25
[    1.817918] amdgpu 0000:06:00.0: vgaarb: deactivate vga console
[    1.817945] amdgpu 0000:06:00.0: enabling device (0006 -> 0007)
[    1.817969] [drm] initializing kernel modesetting (RENOIR 0x1002:0x1638 0x103C:0x88EC 0xC6).
[    1.817971] amdgpu 0000:06:00.0: amdgpu: Trusted Memory Zone (TMZ) feature enabled
[    1.817977] [drm] register mmio base: 0xFC500000
[    1.817978] [drm] register mmio size: 524288
[    1.819005] [drm] add ip block number 0 <soc15_common>
[    1.819006] [drm] add ip block number 1 <gmc_v9_0>
[    1.819007] [drm] add ip block number 2 <vega10_ih>
[    1.819007] [drm] add ip block number 3 <psp>
[    1.819008] [drm] add ip block number 4 <smu>
[    1.819008] [drm] add ip block number 5 <dm>
[    1.819009] [drm] add ip block number 6 <gfx_v9_0>
[    1.819009] [drm] add ip block number 7 <sdma_v4_0>
[    1.819010] [drm] add ip block number 8 <vcn_v2_0>
[    1.819011] [drm] add ip block number 9 <jpeg_v2_0>
[    1.819019] amdgpu 0000:06:00.0: amdgpu: Fetched VBIOS from VFCT
[    1.819020] amdgpu: ATOM BIOS: 113-CEZANNE-018
[    1.819039] amdgpu 0000:06:00.0: firmware: direct-loading firmware amdgpu/green_sardine_sdma.bin
[    1.819040] [drm] VCN decode is enabled in VM mode
[    1.819041] [drm] VCN encode is enabled in VM mode
[    1.819041] [drm] JPEG decode is enabled in VM mode
[    1.819042] amdgpu 0000:06:00.0: amdgpu: PCIE atomic ops is not supported
[    1.819061] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
[    1.819064] amdgpu 0000:06:00.0: amdgpu: VRAM: 512M 0x000000F400000000 - 0x000000F41FFFFFFF (512M used)
[    1.819066] amdgpu 0000:06:00.0: amdgpu: GART: 1024M 0x0000000000000000 - 0x000000003FFFFFFF
[    1.819066] amdgpu 0000:06:00.0: amdgpu: AGP: 267419648M 0x000000F800000000 - 0x0000FFFFFFFFFFFF
[    1.819071] [drm] Detected VRAM RAM=512M, BAR=512M
[    1.819071] [drm] RAM width 128bits DDR4
[    1.819094] [drm] amdgpu: 512M of VRAM memory ready
[    1.819095] [drm] amdgpu: 3072M of GTT memory ready.
[    1.819097] [drm] GART: num cpu pages 262144, num gpu pages 262144
[    1.819210] [drm] PCIE GART of 1024M enabled.
[    1.819212] [drm] PTB located at 0x000000F400900000
[    1.819324] amdgpu 0000:06:00.0: firmware: direct-loading firmware amdgpu/green_sardine_asd.bin
[    1.819335] amdgpu 0000:06:00.0: firmware: direct-loading firmware amdgpu/green_sardine_ta.bin
[    1.819336] amdgpu 0000:06:00.0: amdgpu: PSP runtime database doesn't exist
[    1.819354] amdgpu 0000:06:00.0: firmware: direct-loading firmware amdgpu/green_sardine_dmcub.bin
[    1.819355] [drm] Loading DMUB firmware via PSP: version=0x0101000A
[    1.819370] amdgpu 0000:06:00.0: firmware: direct-loading firmware amdgpu/green_sardine_pfp.bin
[    1.819381] amdgpu 0000:06:00.0: firmware: direct-loading firmware amdgpu/green_sardine_me.bin
[    1.819390] amdgpu 0000:06:00.0: firmware: direct-loading firmware amdgpu/green_sardine_ce.bin
[    1.819399] amdgpu 0000:06:00.0: firmware: direct-loading firmware amdgpu/green_sardine_rlc.bin
[    1.819432] amdgpu 0000:06:00.0: firmware: direct-loading firmware amdgpu/green_sardine_mec.bin
[    1.819925] amdgpu 0000:06:00.0: firmware: direct-loading firmware amdgpu/green_sardine_vcn.bin
[    1.819928] [drm] Found VCN firmware Version ENC: 1.7 DEC: 4 VEP: 0 Revision: 17
[    1.819930] amdgpu 0000:06:00.0: amdgpu: Will use PSP to load VCN firmware
[    1.904560] usb 1-3: new high-speed USB device number 2 using xhci_hcd
[    1.912558] usb 3-2: new high-speed USB device number 2 using xhci_hcd
[    2.063767] usb 1-3: New USB device found, idVendor=30c9, idProduct=000e, bcdDevice= 0.02
[    2.063770] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.063772] usb 1-3: Product: HP Wide Vision HD Camera
[    2.063773] usb 1-3: Manufacturer: DJKANA1BIFBPNG
[    2.077209] usb 3-2: New USB device found, idVendor=0bda, idProduct=5411, bcdDevice= 1.21
[    2.077212] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.077213] usb 3-2: Product: 4-Port USB 2.0 Hub
[    2.077214] usb 3-2: Manufacturer: Generic
[    2.136989] hub 3-2:1.0: USB hub found
[    2.138082] hub 3-2:1.0: 4 ports detected
[    2.200482] usb 4-2: new SuperSpeed USB device number 2 using xhci_hcd
[    2.213034] usb 1-4: new full-speed USB device number 3 using xhci_hcd
[    2.231277] usb 4-2: New USB device found, idVendor=0bda, idProduct=0411, bcdDevice= 1.21
[    2.231280] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.231281] usb 4-2: Product: 4-Port USB 3.0 Hub
[    2.231282] usb 4-2: Manufacturer: Generic
[    2.252157] hub 4-2:1.0: USB hub found
[    2.253361] hub 4-2:1.0: 4 ports detected
[    2.380343] usb 1-4: New USB device found, idVendor=0bda, idProduct=2852, bcdDevice= 0.00
[    2.380346] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.380348] usb 1-4: Product: Bluetooth Radio
[    2.380349] usb 1-4: Manufacturer: Realtek
[    2.380349] usb 1-4: SerialNumber: 00e04c000001
[    2.488855] usb 3-2.1: new low-speed USB device number 3 using xhci_hcd
[    2.542370] [drm] reserve 0x400000 from 0xf41f800000 for PSP TMR
[    2.605200] usb 3-2.1: New USB device found, idVendor=093a, idProduct=2510, bcdDevice= 1.00
[    2.605205] usb 3-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.605207] usb 3-2.1: Product: USB Optical Mouse
[    2.605209] usb 3-2.1: Manufacturer: PixArt
[    2.630124] amdgpu 0000:06:00.0: amdgpu: RAS: optional ras ta ucode is not available
[    2.638230] amdgpu 0000:06:00.0: amdgpu: RAP: optional rap ta ucode is not available
[    2.638231] amdgpu 0000:06:00.0: amdgpu: SECUREDISPLAY: securedisplay ta ucode is not available
[    2.639965] amdgpu 0000:06:00.0: amdgpu: SMU is initialized successfully!
[    2.640780] [drm] Display Core initialized with v3.2.160!
[    2.641303] [drm] DMUB hardware initialized: version=0x0101000A
[    2.654237] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:08.1/0000:06:00.4/usb3/3-2/3-2.1/3-2.1:1.0/0003:093A:2510.0002/input/input9
[    2.654286] hid-generic 0003:093A:2510.0002: input,hidraw1: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:06:00.4-2.1/input0
[    2.654303] usbcore: registered new interface driver usbhid
[    2.654304] usbhid: USB HID core driver
[    2.845939] [drm] kiq ring mec 2 pipe 1 q 0
[    2.848129] [drm] VCN decode and encode initialized successfully(under DPG Mode).
[    2.848147] [drm] JPEG decode initialized successfully.
[    2.849278] kfd kfd: amdgpu: Allocated 3969056 bytes on gart
[    2.849364] amdgpu: SRAT table not found
[    2.849364] amdgpu: Virtual CRAT table created for GPU
[    2.849437] amdgpu: Topology: Add dGPU node [0x1638:0x1002]
[    2.849439] kfd kfd: amdgpu: added device 1002:1638
[    2.849445] amdgpu 0000:06:00.0: amdgpu: SE 1, SH per SE 1, CU per SH 8, active_cu_number 7
[    2.851490] [drm] fb mappable at 0x420CD0000
[    2.851491] [drm] vram apper at 0x420000000
[    2.851492] [drm] size 8294400
[    2.851493] [drm] fb depth is 24
[    2.851493] [drm]    pitch is 7680
[    2.851567] fbcon: amdgpudrmfb (fb0) is primary device
[    2.913126] Console: switching to colour frame buffer device 240x67
[    2.930742] amdgpu 0000:06:00.0: [drm] fb0: amdgpudrmfb frame buffer device
[    2.946418] amdgpu 0000:06:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0
[    2.946420] amdgpu 0000:06:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0
[    2.946421] amdgpu 0000:06:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0
[    2.946421] amdgpu 0000:06:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0
[    2.946422] amdgpu 0000:06:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0
[    2.946422] amdgpu 0000:06:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0
[    2.946423] amdgpu 0000:06:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0
[    2.946423] amdgpu 0000:06:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0
[    2.946424] amdgpu 0000:06:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0
[    2.946424] amdgpu 0000:06:00.0: amdgpu: ring kiq_2.1.0 uses VM inv eng 11 on hub 0
[    2.946425] amdgpu 0000:06:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 1
[    2.946425] amdgpu 0000:06:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 1
[    2.946426] amdgpu 0000:06:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 1
[    2.946426] amdgpu 0000:06:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 1
[    2.946427] amdgpu 0000:06:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 1
[    2.948571] [drm] Initialized amdgpu 3.44.0 20150101 for 0000:06:00.0 on minor 0
[    2.991010] PM: Image not found (code -22)
[    3.056279] EXT4-fs (nvme0n1p6): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[    3.089119] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[    3.121383] systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.
[    3.131556] systemd[1]: Inserted module 'autofs4'
[    3.150254] systemd[1]: systemd 247.3-7 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[    3.168989] systemd[1]: Detected architecture x86-64.
[    3.169536] systemd[1]: Set hostname to <VICTUSG>.
[    3.229346] systemd[1]: /lib/systemd/system/plymouth-start.service:16: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
[    3.241964] systemd[1]: Queued start job for default target Graphical Interface.
[    3.242683] systemd[1]: Created slice system-getty.slice.
[    3.242815] systemd[1]: Created slice system-modprobe.slice.
[    3.242952] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    3.243041] systemd[1]: Created slice User and Session Slice.
[    3.243074] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    3.243153] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    3.243188] systemd[1]: Reached target User and Group Name Lookups.
[    3.243201] systemd[1]: Reached target Slices.
[    3.245290] systemd[1]: Listening on RPCbind Server Activation Socket.
[    3.245350] systemd[1]: Listening on Syslog Socket.
[    3.245397] systemd[1]: Listening on fsck to fsckd communication Socket.
[    3.245423] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    3.245496] systemd[1]: Listening on Journal Audit Socket.
[    3.245539] systemd[1]: Listening on Journal Socket (/dev/log).
[    3.245594] systemd[1]: Listening on Journal Socket.
[    3.245778] systemd[1]: Listening on udev Control Socket.
[    3.245821] systemd[1]: Listening on udev Kernel Socket.
[    3.246168] systemd[1]: Mounting Huge Pages File System...
[    3.246513] systemd[1]: Mounting POSIX Message Queue File System...
[    3.247057] systemd[1]: Mounting NFSD configuration filesystem...
[    3.247421] systemd[1]: Mounting RPC Pipe File System...
[    3.247787] systemd[1]: Mounting Kernel Debug File System...
[    3.248145] systemd[1]: Mounting Kernel Trace File System...
[    3.248191] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
[    3.248534] systemd[1]: Starting Set the console keyboard layout...
[    3.248909] systemd[1]: Starting Create list of static device nodes for the current kernel...
[    3.249320] systemd[1]: Starting Load Kernel Module configfs...
[    3.249666] systemd[1]: Starting Load Kernel Module drm...
[    3.250027] systemd[1]: Starting Load Kernel Module fuse...
[    3.252126] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[    3.252146] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[    3.252944] systemd[1]: Starting Journal Service...
[    3.253780] systemd[1]: Starting Load Kernel Modules...
[    3.254247] systemd[1]: Starting Remount Root and Kernel File Systems...
[    3.254713] systemd[1]: Starting Coldplug All udev Devices...
[    3.255804] systemd[1]: Mounted Huge Pages File System.
[    3.255932] systemd[1]: Mounted POSIX Message Queue File System.
[    3.256042] systemd[1]: Mounted Kernel Debug File System.
[    3.256134] systemd[1]: Mounted Kernel Trace File System.
[    3.256459] systemd[1]: Finished Create list of static device nodes for the current kernel.
[    3.256756] systemd[1]: modprobe@configfs.service: Succeeded.
[    3.256922] systemd[1]: Finished Load Kernel Module configfs.
[    3.257097] systemd[1]: modprobe@drm.service: Succeeded.
[    3.257263] systemd[1]: Finished Load Kernel Module drm.
[    3.258024] systemd[1]: Mounting Kernel Configuration File System...
[    3.258186] fuse: init (API version 7.35)
[    3.258508] systemd[1]: modprobe@fuse.service: Succeeded.
[    3.258623] systemd[1]: Finished Load Kernel Module fuse.
[    3.258833] EXT4-fs (nvme0n1p6): re-mounted. Opts: errors=remount-ro. Quota mode: none.
[    3.259086] systemd[1]: Mounting FUSE Control File System...
[    3.259719] systemd[1]: Finished Remount Root and Kernel File Systems.
[    3.260012] systemd[1]: Mounted Kernel Configuration File System.
[    3.260087] systemd[1]: Mounted FUSE Control File System.
[    3.260430] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[    3.260452] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[    3.260866] systemd[1]: Starting Load/Save Random Seed...
[    3.261296] systemd[1]: Starting Create System Users...
[    3.263946] lp: driver loaded but no devices found
[    3.266107] ppdev: user-space parallel port driver
[    3.267749] systemd[1]: Finished Load/Save Random Seed.
[    3.267957] systemd[1]: Finished Create System Users.
[    3.268050] systemd[1]: Condition check resulted in First Boot Complete being skipped.
[    3.268490] systemd[1]: Starting Create Static Device Nodes in /dev...
[    3.275901] systemd[1]: Finished Create Static Device Nodes in /dev.
[    3.277263] systemd[1]: Starting Rule-based Manager for Device Events and Files...
[    3.280413] systemd[1]: systemd-modules-load.service: Main process exited, code=exited, status=1/FAILURE
[    3.280417] RPC: Registered named UNIX socket transport module.
[    3.280419] RPC: Registered udp transport module.
[    3.280420] RPC: Registered tcp transport module.
[    3.280420] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    3.280524] systemd[1]: systemd-modules-load.service: Failed with result 'exit-code'.
[    3.280760] systemd[1]: Failed to start Load Kernel Modules.
[    3.281407] systemd[1]: Mounted RPC Pipe File System.
[    3.282053] systemd[1]: Starting pNFS block layout mapping daemon...
[    3.282522] systemd[1]: Starting Apply Kernel Variables...
[    3.285517] systemd[1]: Started pNFS block layout mapping daemon.
[    3.287224] systemd[1]: Finished Apply Kernel Variables.
[    3.296059] systemd[1]: Finished Set the console keyboard layout.
[    3.296132] systemd[1]: Reached target Local File Systems (Pre).
[    3.303457] systemd[1]: Started Journal Service.
[    3.306931] systemd-journald[350]: Received client request to flush runtime journal.
[    3.323871] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    3.366339] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[    3.366459] snd_rn_pci_acp3x 0000:06:00.5: enabling device (0000 -> 0002)
[    3.366756] ccp 0000:06:00.2: enabling device (0000 -> 0002)
[    3.367600] sp5100-tco sp5100-tco: Using 0xfeb00000 for watchdog MMIO address
[    3.367607] sp5100-tco sp5100-tco: Watchdog hardware is disabled
[    3.368859] ccp 0000:06:00.2: ccp: unable to access the device: you might be running a broken BIOS.
[    3.379005] ccp 0000:06:00.2: tee enabled
[    3.379010] ccp 0000:06:00.2: psp enabled
[    3.391725] pstore: Using crash dump compression: deflate
[    3.391736] pstore: Registered efi as persistent store backend
[    3.392659] input: PC Speaker as /devices/platform/pcspkr/input/input10
[    3.394860] ACPI: AC: AC Adapter [ACAD] (off-line)
[    3.408925] Adding 1000444k swap on /dev/nvme0n1p7.  Priority:-2 extents:1 across:1000444k SSFS
[    3.425947] EXT4-fs (nvme0n1p8): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[    3.436576] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[    3.441308] mc: Linux media interface: v0.10
[    3.442071] RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer
[    3.442073] RAPL PMU: hw unit of domain package 2^-16 Joules
[    3.442298] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    3.442473] cfg80211: Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
[    3.442649] cfg80211: Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[    3.442821] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    3.443520] platform regulatory.0: firmware: direct-loading firmware regulatory.db
[    3.443952] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s
[    3.444095] cryptd: max_cpu_qlen set to 1000
[    3.445859] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
[    3.446161] snd_hda_intel 0000:01:00.1: Disabling MSI
[    3.446165] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[    3.446174] input: HP WMI hotkeys as /devices/virtual/input/input11
[    3.446221] snd_hda_intel 0000:06:00.1: enabling device (0000 -> 0002)
[    3.446251] snd_hda_intel 0000:06:00.1: Handle vga_switcheroo audio client
[    3.446274] snd_hda_intel 0000:06:00.6: enabling device (0000 -> 0002)
[    3.451854] videodev: Linux video capture interface: v2.00
[    3.454484] AVX2 version of gcm_enc/dec engaged.
[    3.454518] AES CTR mode by8 optimization enabled
[    3.458013] alg: skcipher: failed to allocate transform for ctr(aes-generic): -2
[    3.458051] ------------[ cut here ]------------
[    3.458052] alg: self-tests for ctr(aes-generic) (ctr(aes)) failed (rc=-2)
[    3.458060] WARNING: CPU: 7 PID: 476 at crypto/testmgr.c:5681 alg_test+0x36e/0x550
[    3.458067] Modules linked in: videobuf2_v4l2 videobuf2_common aesni_intel(+) nls_ascii videodev nls_cp437 ctr snd_hda_intel crypto_simd libarc4 cryptd snd_intel_dspcfg vfat drbg(+) hp_wmi(+) snd_intel_sdw_acpi fat rapl platform_profile pcc_cpufreq(-) mc ansi_cprng sparse_keymap snd_hda_codec wmi_bmof cfg80211 serio_raw pcspkr(+) ecdh_generic(+) efi_pstore snd_hda_core ecc hid_multitouch(+) snd_hwdep snd_pcm snd_timer ucsi_acpi(+) typec_ucsi snd snd_rn_pci_acp3x sp5100_tco k10temp ccp roles rfkill soundcore snd_pci_acp3x watchdog rng_core typec evdev acpi_cpufreq acpi_tad ac nfsd auth_rpcgss nfs_acl lockd grace msr sunrpc parport_pc ppdev lp parport fuse configfs efivarfs ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 crc32c_generic usbhid amdgpu gpu_sched i2c_algo_bit drm_ttm_helper ttm drm_kms_helper nvme r8169 cec nvme_core sdhci_pci rc_core realtek cqhci hid_generic t10_pi xhci_pci crc_t10dif xhci_hcd mdio_devres sdhci crct10dif_generic i2c_hid_acpi drm usbcore crc32_pclmul
[    3.458132]  crc32c_intel i2c_hid crct10dif_pclmul libphy mmc_core i2c_piix4 usb_common crct10dif_common wmi battery hid video button
[    3.458141] CPU: 7 PID: 476 Comm: cryptomgr_test Not tainted 5.16.0-0.bpo.4-amd64 #1  Debian 5.16.12-1~bpo11+1
[    3.458143] Hardware name: HP Victus by HP Laptop 16-e0xxx/88EC, BIOS F.11 09/14/2021
[    3.458145] RIP: 0010:alg_test+0x36e/0x550
[    3.458148] Code: 01 00 00 80 3d 47 6c c1 01 00 0f 85 c2 01 00 00 44 89 c1 4c 89 ea 48 89 ee 48 c7 c7 f8 04 15 b2 44 89 44 24 08 e8 f6 dc 4a 00 <0f> 0b 44 8b 44 24 08 48 8b 84 24 a0 00 00 00 65 48 2b 04 25 28 00
[    3.458150] RSP: 0018:ffffb7a380e07e28 EFLAGS: 00010282
[    3.458152] RAX: 0000000000000000 RBX: 0000000000000f80 RCX: 0000000000000000
[    3.458154] RDX: 0000000000000001 RSI: ffffffffb214e5de RDI: 00000000ffffffff
[    3.458155] RBP: ffff922a816b5000 R08: 0000000000000000 R09: ffffb7a380e07c58
[    3.458157] R10: ffffb7a380e07c50 R11: ffffffffb26d2468 R12: 0000000000000805
[    3.458158] R13: ffff922a816b5080 R14: 000000000000003f R15: 000000000000003f
[    3.458160] FS:  0000000000000000(0000) GS:ffff922d8e5c0000(0000) knlGS:0000000000000000
[    3.458161] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    3.458163] CR2: 00007f871fc5e11b CR3: 0000000139cce000 CR4: 0000000000750ee0
[    3.458164] PKRU: 55555554
[    3.458165] Call Trace:
[    3.458168]  <TASK>
[    3.458170]  ? _raw_spin_unlock+0x16/0x30
[    3.458174]  ? finish_task_switch.isra.0+0xc1/0x2f0
[    3.458178]  ? __switch_to+0x114/0x440
[    3.458181]  ? __schedule+0x30f/0x9f0
[    3.458184]  ? crypto_acomp_scomp_free_ctx+0x30/0x30
[    3.458187]  cryptomgr_test+0x27/0x50
[    3.458190]  kthread+0x16b/0x190
[    3.458193]  ? set_kthread_struct+0x40/0x40
[    3.458196]  ret_from_fork+0x22/0x30
[    3.458200]  </TASK>
[    3.458201] ---[ end trace 87327e3898ced0e5 ]---
[    3.458265] DRBG: could not allocate CTR cipher TFM handle: ctr(aes)
[    3.458269] alg: drbg: Failed to reset rng
[    3.458289] alg: drbg: Test 0 failed for drbg_pr_ctr_aes128
[    3.458310] ------------[ cut here ]------------
[    3.458311] alg: self-tests for drbg_pr_ctr_aes128 (stdrng) failed (rc=-22)
[    3.458315] WARNING: CPU: 2 PID: 467 at crypto/testmgr.c:5681 alg_test+0x36e/0x550
[    3.458320] Modules linked in: videobuf2_v4l2 videobuf2_common aesni_intel(+) nls_ascii videodev nls_cp437 ctr snd_hda_intel crypto_simd libarc4 cryptd snd_intel_dspcfg vfat drbg(+) hp_wmi(+) snd_intel_sdw_acpi fat rapl platform_profile pcc_cpufreq(-) mc ansi_cprng sparse_keymap snd_hda_codec wmi_bmof cfg80211 serio_raw pcspkr(+) ecdh_generic(+) efi_pstore snd_hda_core ecc hid_multitouch(+) snd_hwdep snd_pcm snd_timer ucsi_acpi(+) typec_ucsi snd snd_rn_pci_acp3x sp5100_tco k10temp ccp roles rfkill soundcore snd_pci_acp3x watchdog rng_core typec evdev acpi_cpufreq acpi_tad ac nfsd auth_rpcgss nfs_acl lockd grace msr sunrpc parport_pc ppdev lp parport fuse configfs efivarfs ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 crc32c_generic usbhid amdgpu gpu_sched i2c_algo_bit drm_ttm_helper ttm drm_kms_helper nvme r8169 cec nvme_core sdhci_pci rc_core realtek cqhci hid_generic t10_pi xhci_pci crc_t10dif xhci_hcd mdio_devres sdhci crct10dif_generic i2c_hid_acpi drm usbcore crc32_pclmul
[    3.458377]  crc32c_intel i2c_hid crct10dif_pclmul libphy mmc_core i2c_piix4 usb_common crct10dif_common wmi battery hid video button
[    3.458385] CPU: 2 PID: 467 Comm: cryptomgr_test Tainted: G        W         5.16.0-0.bpo.4-amd64 #1  Debian 5.16.12-1~bpo11+1
[    3.458388] Hardware name: HP Victus by HP Laptop 16-e0xxx/88EC, BIOS F.11 09/14/2021
[    3.458389] RIP: 0010:alg_test+0x36e/0x550
[    3.458392] Code: 01 00 00 80 3d 47 6c c1 01 00 0f 85 c2 01 00 00 44 89 c1 4c 89 ea 48 89 ee 48 c7 c7 f8 04 15 b2 44 89 44 24 08 e8 f6 dc 4a 00 <0f> 0b 44 8b 44 24 08 48 8b 84 24 a0 00 00 00 65 48 2b 04 25 28 00
[    3.458394] RSP: 0018:ffffb7a380583e28 EFLAGS: 00010282
[    3.458397] RAX: 0000000000000000 RBX: 00000000ffffffff RCX: 0000000000000000
[    3.458398] RDX: 0000000000000001 RSI: ffffffffb214e5de RDI: 00000000ffffffff
[    3.458400] RBP: ffff922a89c89200 R08: 0000000000000000 R09: ffffb7a380583c58
[    3.458402] R10: ffffb7a380583c50 R11: ffffffffb26d2468 R12: 000000000000000c
[    3.458403] R13: ffff922a89c89280 R14: 000000000000005b R15: 00000000000016c0
[    3.458405] FS:  0000000000000000(0000) GS:ffff922d8e480000(0000) knlGS:0000000000000000
[    3.458407] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    3.458408] CR2: 00007f72f5278000 CR3: 0000000106600000 CR4: 0000000000750ee0
[    3.458410] PKRU: 55555554
[    3.458411] Call Trace:
[    3.458412]  <TASK>
[    3.458414]  ? _raw_spin_unlock+0x16/0x30
[    3.458418]  ? finish_task_switch.isra.0+0xc1/0x2f0
[    3.458420]  ? __switch_to+0x114/0x440
[    3.458423]  ? __schedule+0x30f/0x9f0
[    3.458425]  ? crypto_acomp_scomp_free_ctx+0x30/0x30
[    3.458428]  cryptomgr_test+0x27/0x50
[    3.458431]  kthread+0x16b/0x190
[    3.458433]  ? set_kthread_struct+0x40/0x40
[    3.458435]  ret_from_fork+0x22/0x30
[    3.458439]  </TASK>
[    3.458440] ---[ end trace 87327e3898ced0e6 ]---
[    3.458949] snd_hda_intel 0000:06:00.1: bound 0000:06:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
[    3.464797] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.1/0000:06:00.1/sound/card1/input12
[    3.464908] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/0000:01:00.1/sound/card0/input13
[    3.465521] usb 1-3: Found UVC 1.00 device HP Wide Vision HD Camera (30c9:000e)
[    3.478016] audit: type=1400 audit(1649571984.253:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=584 comm="apparmor_parser"
[    3.478314] audit: type=1400 audit(1649571984.253:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=583 comm="apparmor_parser"
[    3.478742] audit: type=1400 audit(1649571984.253:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=590 comm="apparmor_parser"
[    3.478747] audit: type=1400 audit(1649571984.253:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=590 comm="apparmor_parser"
[    3.479138] audit: type=1400 audit(1649571984.253:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=582 comm="apparmor_parser"
[    3.479143] audit: type=1400 audit(1649571984.253:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=582 comm="apparmor_parser"
[    3.479146] audit: type=1400 audit(1649571984.253:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=582 comm="apparmor_parser"
[    3.479593] audit: type=1400 audit(1649571984.253:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=587 comm="apparmor_parser"
[    3.479655] audit: type=1400 audit(1649571984.253:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=589 comm="apparmor_parser"
[    3.485924] input: HP Wide Vision HD Camera: HP Wi as /devices/pci0000:00/0000:00:08.1/0000:06:00.3/usb1/1-3/1-3:1.0/input/input17
[    3.486006] usbcore: registered new interface driver uvcvideo
[    3.487265] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/0000:01:00.1/sound/card0/input14
[    3.552516] snd_hda_codec_realtek hdaudioC2D0: autoconfig for ALC245: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    3.552532] snd_hda_codec_realtek hdaudioC2D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    3.552535] snd_hda_codec_realtek hdaudioC2D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    3.552536] snd_hda_codec_realtek hdaudioC2D0:    mono: mono_out=0x0
[    3.552537] snd_hda_codec_realtek hdaudioC2D0:    inputs:
[    3.552539] snd_hda_codec_realtek hdaudioC2D0:      Mic=0x19
[    3.580746] Bluetooth: Core ver 2.22
[    3.580768] NET: Registered PF_BLUETOOTH protocol family
[    3.580769] Bluetooth: HCI device and connection manager initialized
[    3.580772] Bluetooth: HCI socket layer initialized
[    3.580774] Bluetooth: L2CAP socket layer initialized
[    3.580778] Bluetooth: SCO socket layer initialized
[    3.604626] rtw89_pci 0000:03:00.0: enabling device (0000 -> 0003)
[    3.605900] rtw89_pci 0000:03:00.0: firmware: direct-loading firmware rtw89/rtw8852a_fw.bin
[    3.606522] rtw89_pci 0000:03:00.0: Firmware version 0.9.12.2, cmd version 0, type 1
[    3.618197] SVM: TSC scaling supported
[    3.618200] kvm: Nested Virtualization enabled
[    3.618201] SVM: kvm: Nested Paging enabled
[    3.618211] SVM: Virtual VMLOAD VMSAVE supported
[    3.618212] SVM: Virtual GIF supported
[    3.618213] SVM: LBR virtualization supported
[    3.620863] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.1/0000:01:00.1/sound/card0/input15
[    3.620918] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.1/0000:01:00.1/sound/card0/input16
[    3.623604] rtw89_pci 0000:03:00.0: chip rfe_type is 1
[    3.628647] input: SYNA32B9:00 06CB:CE7D Mouse as /devices/platform/AMDI0010:03/i2c-0/i2c-SYNA32B9:00/0018:06CB:CE7D.0001/input/input18
[    3.628789] input: SYNA32B9:00 06CB:CE7D Touchpad as /devices/platform/AMDI0010:03/i2c-0/i2c-SYNA32B9:00/0018:06CB:CE7D.0001/input/input19
[    3.628874] hid-multitouch 0018:06CB:CE7D.0001: input,hidraw0: I2C HID v1.00 Mouse [SYNA32B9:00 06CB:CE7D] on i2c-SYNA32B9:00
[    3.633909] usbcore: registered new interface driver btusb
[    3.637564] Bluetooth: hci0: RTL: examining hci_ver=0b hci_rev=000a lmp_ver=0b lmp_subver=8852
[    3.638668] MCE: In-kernel MCE decoding enabled.
[    3.639018] Bluetooth: hci0: RTL: rom_version status=0 version=1
[    3.639021] Bluetooth: hci0: RTL: loading rtl_bt/rtl8852au_fw.bin
[    3.639395] bluetooth hci0: firmware: direct-loading firmware rtl_bt/rtl8852au_fw.bin
[    3.639433] Bluetooth: hci0: RTL: loading rtl_bt/rtl8852au_config.bin
[    3.639656] bluetooth hci0: firmware: direct-loading firmware rtl_bt/rtl8852au_config.bin
[    3.639675] Bluetooth: hci0: RTL: cfg_sz 6, total sz 31027
[    3.821647] rtw89_pci 0000:03:00.0 wlo1: renamed from wlan0
[    3.851454] r8169 0000:02:00.0: firmware: direct-loading firmware rtl_nic/rtl8168h-2.fw
[    3.860981] intel_rapl_common: Found RAPL domain package
[    3.860983] intel_rapl_common: Found RAPL domain core
[    3.861149] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    3.861151] Bluetooth: BNEP filters: protocol multicast
[    3.861154] Bluetooth: BNEP socket layer initialized
[    3.876593] Generic FE-GE Realtek PHY r8169-0-200:00: attached PHY driver (mii_bus:phy_addr=r8169-0-200:00, irq=MAC)
[    3.912101] Bluetooth: hci0: RTL: fw version 0xd99a7644
[    4.057343] Bluetooth: hci0: Failed to read codec capabilities (-22)
[    4.073015] r8169 0000:02:00.0 eno1: Link is Down
[    4.118703] NET: Registered PF_ALG protocol family
[    4.210134] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:08.1/0000:06:00.6/sound/card2/input21
[    4.210186] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:08.1/0000:06:00.6/sound/card2/input22
[    4.892379] NFSD: Using UMH upcall client tracking operations.
[    4.892391] NFSD: starting 90-second grace period (net f0000098)
[    5.346925] Bluetooth: RFCOMM TTY layer initialized
[    5.346937] Bluetooth: RFCOMM socket layer initialized
[    5.346942] Bluetooth: RFCOMM ver 1.11
[    6.579263] rfkill: input handler disabled
[    7.229313] r8169 0000:02:00.0 eno1: Link is Up - 1Gbps/Full - flow control rx/tx
[    7.229323] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[   20.020162] rfkill: input handler enabled
[   21.374280] rfkill: input handler disabled
[   50.816092] kauditd_printk_skb: 13 callbacks suppressed
[   50.816095] audit: type=1400 audit(1649572053.056:24): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/usr/share/libdrm/amdgpu.ids" pid=2733 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[   53.355620] audit: type=1400 audit(1649572055.596:25): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/gerard/.mozilla/firefox/xsk8b4c8.default/cert9.db" pid=2732 comm="soffice.bin" requested_mask="wc" denied_mask="wc" fsuid=1000 ouid=1000
[   53.356144] audit: type=1400 audit(1649572055.596:26): apparmor="ALLOWED" operation="file_lock" profile="libreoffice-soffice" name="/home/gerard/.mozilla/firefox/xsk8b4c8.default/cert9.db" pid=2732 comm="soffice.bin" requested_mask="k" denied_mask="k" fsuid=1000 ouid=1000
[   53.356455] audit: type=1400 audit(1649572055.596:27): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/gerard/.mozilla/firefox/xsk8b4c8.default/key4.db" pid=2732 comm="soffice.bin" requested_mask="wrc" denied_mask="wrc" fsuid=1000 ouid=1000
[   53.356620] audit: type=1400 audit(1649572055.600:28): apparmor="ALLOWED" operation="file_lock" profile="libreoffice-soffice" name="/home/gerard/.mozilla/firefox/xsk8b4c8.default/key4.db" pid=2732 comm="soffice.bin" requested_mask="k" denied_mask="k" fsuid=1000 ouid=1000
root@VICTUSG:~#

les lignes suivantes font référence à rtw89
[ 3.604626] rtw89_pci 0000:03:00.0: enabling device (0000 -> 0003)
[ 3.605900] rtw89_pci 0000:03:00.0: firmware: direct-loading firmware rtw89/rtw8852a_fw.bin
[ 3.606522] rtw89_pci 0000:03:00.0: Firmware version 0.9.12.2, cmd version 0, type 1
[ 3.623604] rtw89_pci 0000:03:00.0: chip rfe_type is 1
[ 3.821647] rtw89_pci 0000:03:00.0 wlo1: renamed from wlan0
Est ce suffisant ???

4 /

PascalHambourg a écrit :
PS: pourquoi dkms est-il installé ? As-tu installé un pilote externe (nvidia, virtualbox...) ? Dans ce cas il faudra installer le paquet linux-headers-amd64 des backports.

4a /
Oui pour installer le pilote graphique nvidia

4b /
Installation de linux-headers-amd64 :

Code : Tout sélectionner

root@VICTUSG:~# apt -t bullseye-backports install  linux-headers-amd64
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances... Fait
Lecture des informations d'état... Fait      
Les paquets supplémentaires suivants seront installés : 
  linux-headers-5.16.0-0.bpo.4-amd64 linux-headers-5.16.0-0.bpo.4-common
  linux-kbuild-5.16
Les NOUVEAUX paquets suivants seront installés :
  linux-headers-5.16.0-0.bpo.4-amd64 linux-headers-5.16.0-0.bpo.4-common
  linux-kbuild-5.16
Les paquets suivants seront mis à jour :
  linux-headers-amd64
1 mis à jour, 3 nouvellement installés, 0 à enlever et 129 non mis à jour.
Il est nécessaire de prendre 10,9 Mo dans les archives.
Après cette opération, 59,5 Mo d'espace disque supplémentaires seront utilisés.
Souhaitez-vous continuer ? [O/n] o
Réception de :1 http://deb.debian.org/debian bullseye-backports/main amd64 linux-headers-5.16.0-0.bpo.4-common all 5.16.12-1~bpo11+1 [9 258 kB]
Réception de :2 http://deb.debian.org/debian bullseye-backports/main amd64 linux-kbuild-5.16 amd64 5.16.12-1~bpo11+1 [666 kB]
Réception de :3 http://deb.debian.org/debian bullseye-backports/main amd64 linux-headers-5.16.0-0.bpo.4-amd64 amd64 5.16.12-1~bpo11+1 [939 kB]
Réception de :4 http://deb.debian.org/debian bullseye-backports/main amd64 linux-headers-amd64 amd64 5.16.12-1~bpo11+1 [1 200 B]
10,9 Mo réceptionnés en 9s (1 210 ko/s)                                        
Lecture des fichiers de modifications (« changelog »)... Terminé
Sélection du paquet linux-headers-5.16.0-0.bpo.4-common précédemment désélection
né.
(Lecture de la base de données... 238460 fichiers et répertoires déjà installés.
)
Préparation du dépaquetage de .../linux-headers-5.16.0-0.bpo.4-common_5.16.12-1~
bpo11+1_all.deb ...
Dépaquetage de linux-headers-5.16.0-0.bpo.4-common (5.16.12-1~bpo11+1) ...
Sélection du paquet linux-kbuild-5.16 précédemment désélectionné.
Préparation du dépaquetage de .../linux-kbuild-5.16_5.16.12-1~bpo11+1_amd64.deb 
...
Dépaquetage de linux-kbuild-5.16 (5.16.12-1~bpo11+1) ...
Sélection du paquet linux-headers-5.16.0-0.bpo.4-amd64 précédemment désélectionn
é.
Préparation du dépaquetage de .../linux-headers-5.16.0-0.bpo.4-amd64_5.16.12-1~b
po11+1_amd64.deb ...
Dépaquetage de linux-headers-5.16.0-0.bpo.4-amd64 (5.16.12-1~bpo11+1) ...
Préparation du dépaquetage de .../linux-headers-amd64_5.16.12-1~bpo11+1_amd64.de
b ...
Dépaquetage de linux-headers-amd64 (5.16.12-1~bpo11+1) sur (5.10.106-1) ...
Paramétrage de linux-headers-5.16.0-0.bpo.4-common (5.16.12-1~bpo11+1) ...
Paramétrage de linux-kbuild-5.16 (5.16.12-1~bpo11+1) ...
Paramétrage de linux-headers-5.16.0-0.bpo.4-amd64 (5.16.12-1~bpo11+1) ...
/etc/kernel/header_postinst.d/dkms:
dkms: running auto installation service for kernel 5.16.0-0.bpo.4-amd64:
Kernel preparation unnecessary for this kernel.  Skipping...

Building module:
cleaning build area...
make -j12 KERNELRELEASE=5.16.0-0.bpo.4-amd64 KVERSION=5.16.0-0.bpo.4-amd64...
cleaning build area...

DKMS: build completed.

bbswitch.ko:
Running module version sanity check.
 - Original module
   - No original module exists within this kernel
 - Installation
   - Installing to /lib/modules/5.16.0-0.bpo.4-amd64/updates/dkms/

depmod...

DKMS: install completed.

Kernel preparation unnecessary for this kernel.  Skipping...
applying patch kernel-5.7.0-set-memory-array.patch...patching file conftest.sh

applying patch use-kbuild-compiler.patch...patching file Makefile

applying patch use-kbuild-flags.patch...patching file Kbuild
patching file nvidia/nvidia.Kbuild
patching file Makefile
patching file nvidia-modeset/nvidia-modeset.Kbuild

applying patch use-kbuild-gcc-plugins.patch...patching file Kbuild

applying patch conftest-verbose.patch...patching file Kbuild

applying patch cc_version_check-gcc5.patch...patching file conftest.sh
Hunk #1 succeeded at 4603 (offset 37 lines).

applying patch nvidia-use-ARCH.o_binary.patch...patching file nvidia/nvidia.Kbui
ld

applying patch nvidia-modeset-use-ARCH.o_binary.patch...patching file nvidia-mod
eset/nvidia-modeset.Kbuild

applying patch conftest-prefer-arch-headers.patch...patching file conftest.sh


Building module:
cleaning build area...
unset ARCH; env NV_VERBOSE=1 make -j12 modules KERNEL_UNAME=5.16.0-0.bpo.4-amd64
.....(bad exit status: 2)
Error! Bad return status for module build on kernel: 5.16.0-0.bpo.4-amd64 (x86_6

Consult /var/lib/dkms/nvidia-current/460.91.03/build/make.log for more informati
on.
Paramétrage de linux-headers-amd64 (5.16.12-1~bpo11+1) ...
root@VICTUSG:~#

A ce stade, j’ai bien le wifi accessible sur mon ordinateur

5 /

PascalHambourg a eu cette discusion avec desix le 08/04/2O22
dezix a écrit : ↑08 avr. 2022, 12:16 Les paquets à passer en backports sont est :
linux-image-amd64
firmware-realtek
La modif du 1er pourrait (je n'utilise pas les backports habituellement) entraîner la mise à niveau du second
Je ne pense pas. Donc si le module a besoin d'un firmware pour ce contrôleur, il faudra probablement aussi installer le paquet firmware-realtek des backports.

J’ai un firmware-realtek préinstallé sur mon ordinateur : est-il utile d’installer quand même celui des backports puisque le wifi est fonctionnel ??

Merci à tous pour votre efficacité
A bientôt sur le forum

dezix · 10 avr. 2022, 11:34

ça doit être : # ip link

10 avr. 2022, 14:29

Oui, il y avait des erreurs de frappe dans mes commandes. Je corrige dans le message.
Mais l'interface wifi est maintenant présente (wlo1) et devrait être utilisable.

Concernant l'erreur lors de la compilation du pilote nvidia, je ne sais pas. Peut-être que ces version du pilote et du noyau sont incompatibles (c'est l'inconvénient des pilotes externes au noyau). Il y a peut-être une version du pilote adaptée dans les backports. En tout cas c'est un autres problème.

jandelalune · 10 avr. 2022, 18:53

Salut desix et PascalHambourg

desix a écrit :
ça doit être : # ip link

C’est curieux, j’étais persuadé d’avoir essayé aussi : ip link1 & ip link avec les mêmes résultats, et pourtant :

Code : Tout sélectionner

 
gerard@VICTUSG:~$ ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eno1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP mode DEFAULT group default qlen 1000
    link/ether e0:70:ea:c9:0b:b3 brd ff:ff:ff:ff:ff:ff
    altname enp2s0
3: wlo1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DORMANT group default qlen 1000
    link/ether c8:94:02:aa:7e:25 brd ff:ff:ff:ff:ff:ff
    altname wlp3s0
gerard@VICTUSG:~$

J’ai du réver !!!!!
Par contre je ne comprends pas ce que me dit cette réponse ???

2 /

PascalHambourg a écrit :
Mais l'interface wifi est maintenant présente (wlo1) et devrait être utilisable.

Je confirme : l’interface graphique affiche les wifi de toute la rue.

PascalHambourg a écrit :
Concernant l'erreur lors de la compilation du pilote nvidia, je ne sais pas. Peut-être que ces version du pilote et du noyau sont incompatibles (c'est l'inconvénient des pilotes externes au noyau). Il y a peut-être une version du pilote adaptée dans les backports. En tout cas c'est un autres problème.

est-ce qu’il faut s’en occuper maintenant ou attendre de voir comment se comporte la liaison ??
Merci à vous deux

10 avr. 2022, 23:47

Je ne vois pas le rapport. Le pilote nvidia concerne l'affichage, pas le wifi.

jandelalune · 11 avr. 2022, 15:12

PascalHambourg à écrit :
Je ne vois pas le rapport. Le pilote nvidia concerne l'affichage, pas le wifi.

Navré, je me suis mélangé les pinceaux !!!!

Cordialement

13 avr. 2022, 14:14

Puisque le sujet est résolu, merci d'aller dans le message qui donne la bonne réponse, et cliquer sur accepter cette réponse.
La compilation du driver graphique doit faire l'objet d'un nouveau sujet